Fun fact of the day- WMS

[Ascinder]

For anyone out there wondering the WMS(wheel mounting surface to wheel mounting surface......i.e. axle width) on our Corp. 12 bolt is, it's 63"(that's what I measured:rolleyes:). For those of you that know what this entails, this should be a little gem of information that you can now find in the search for future use. I looked earlier and couldn't find it. As for the front, who knows? Mine has a 4.5" lift, so the A-arms have brought the front stance in substantially as the height increased. I assume Isuzu would have them the same, but I really don't know.

[Triathlete]

I do know that a 78-79 wagoneer wide trac D44 front axle is just about the right width to replace that front IFS stuff!:bwgy:

[Ldub]

Once a baseline measurement is established, assuming all four wheels & tires are the same size & pressure, a person should be able to measure from inside tire tread to inside tire tread on the front & rear and do the math to come up with a measurement that's pretty close for the front track.
Someone with a stock VX perhaps?