PDA

View Full Version : FYI--- Other stock rims that fit a VX



Rene M
08/16/2008, 09:23 PM
GMC 1500-2500 6 x 139.7 rim size 15-16-17-18 stock good offset.
Toyota Tacoma 6x139.7 !6-17 and a few 18 all after market.
i am using gmc wheels on my vx right now.
17x 9.5 for off road tires.

Ldub
08/16/2008, 09:38 PM
GMC 1500-2500 6 x 139.7 rim size 15-16-17-18 stock good offset.
Toyota Tacoma 6x139.7 !6-17 and a few 18 all after market.
i am using gmc wheels on my vx right now.
17x 9.5 for off road tires.

Are you SURE the front hub is clearing the center bore & the rim is seated all the way?
The reason I ask, is that there have been some instances in he past where people have had problems with trying to use late model GM wheels due to a smaller C-bore.

Rene M
08/16/2008, 09:41 PM
Are you SURE the front hub is clearing the center bore & the rim is seated all the way?
The reason I ask, is that there have been some instances in he past where people have had problems with trying to use late model GM wheels due to a smaller C-bore.

I have a set of eagle alloys off of a gmc 2500 on there now and a stock set of tacoma rims which also fit very well.. But i will post close up pics to back this up. pics do not lie.:)

Ldub
08/16/2008, 09:48 PM
I have a set of eagle alloys off of a gmc 2500 on there now and a stock set of tacoma rims which also fit very well.. But i will post close up pics to back this up. pics do not lie.:)

Pics don't lie, but eagle alloys OFF a GM product aren't the same as GM rims from a GM product.
Also, most rims from Japan produced vehicles with the same bolt pattern will fit.

Rene M
08/16/2008, 09:50 PM
Pics don't lie, but eagle alloys OFF a GM product aren't the same as GM rims from a GM product.
Also, most rims from Japan produced vehicles with the same bolt pattern will fit.

good point. i have a set of gmc 2500 rims but no tires at the shop ill give it a try.

LittleBeast
08/17/2008, 12:44 AM
Center bore needs to be 100mm min. Just measure.