Struggling. How do I remove the lower rear cladding?

[Osteomata]

Trying to fix the dent in my lower rear cladding from my little accident, but I can't get the cladding off, and I did not feel like taking off the rear quarter panel claddings to see if I had missed a screw until I checked with you guys. So.... I removed the 5 or 6 upper and 6 lower 10mm bolts from the lower rear cladding, but there still seems to be a connection point on both sides, roughly level with the side marker light. I removed one of the side maker lights to see if I could spot the problem, no luck. I pried up the common seam between the rear quarter panel cladding and the lower rear cladding, and I don't see a connection. What am I missing?
-Os

[etlsport]

look around for a how-to guide on tone's bumper tow hitch, it shows you how to remove the cladding, iirc there are 2 torx screws per side under the quarter panels

[MSHardeman]

and, from what I understand, a lot of double stick tape.

[Sprey]

I can get extra piccies if wanted.

My vxs has a bare butt at the moment.

Like Ldub said 2 torx screws perside are hidden

[Ldub]

iirc there are 2 torx screws per side under the quarter panels


Like Ldub said 2 torx screws perside are hidden

I didn't say that, Eric said that...:smilewink

I'm just the "linkmeister"...:laughing:

[Sprey]

I didn't say that, Eric said that...:smilewink

I'm just the "linkmeister"...:laughing:

Woops!! Lol must have been a bit crosseyed when i looked at it sorry ;)