etlsport
04/03/2010, 06:35 AM
I'm in the process of installing an overhead console, and misjudged the height above the headliner, ive got some interference from the "beam" that goes across the top of the windshield
I am thinking about notching it out to fit the console, it would be a notch about 1/2" deep and 6-7" long
would this be safe? i know that its never a good idea to cut a roof support, but since it is a small area im wondering if i could get away with it... any insight?
if that doesnt work i will probably wind up making a fiberglass trim panel to drop the console down an inch or so to get the clearance i need
I am thinking about notching it out to fit the console, it would be a notch about 1/2" deep and 6-7" long
would this be safe? i know that its never a good idea to cut a roof support, but since it is a small area im wondering if i could get away with it... any insight?
if that doesnt work i will probably wind up making a fiberglass trim panel to drop the console down an inch or so to get the clearance i need