View Full Version : Spare Tire In Roof Rack
circmand
01/03/2011, 03:34 PM
I am tired of my full size spare sliding around in the back, especially with the rear seat removed. I have a nice roof rack I got from Kat which should hold it but I have never bothered to check how others hold the tire in the basket. I dont think letting it bouncing around in the rack is a good idea. I would hate to see the spare come over the windshield and put a big dent in my hood. What have you guys done? Is there a solid product or just home made, or tie downs or bungie cords?
nfpgasmask
01/03/2011, 04:40 PM
I use the good, round bungies like these, 4 of them:
http://www.paragonsports.com/images/medium/5303-p452_24in_pd.jpg
The generic rubber bungies will go to waste in the sun quickly. I also run a cable lock through my tire so it is secured to the rack. I've never had a problem with it moving around or bouncing.
If bungies leave you paranoid, then ratchet straps are the best.
Bart
Triathlete
01/03/2011, 05:00 PM
Just my 2 cents...
I like mine inside. 2 good ratchet straps criss crossed between the tie downs holds it secure even on the worst of my off road misadventures. The drawbacks to me with putting the tire up top is it is a pain in the butt getting a 70+ lbs tire up and down from there (thing solo on the side of the highway someplace)...muck easier to roll it out of the back.:yesy: Plus, I don't have personal experience, but you have got to feel that weight way up high when you hit the curvies.
Riff Raff
01/03/2011, 05:28 PM
I am tired of my full size spare sliding around in the back, especially with the rear seat removed.
Try slowing down before you enter a corner.:laughing:
x2 on what Triathlete said. Get some "motorcycle tie-down straps" and anchor them to the tie-down points within the VX cargo area. If your back seat is removed, you can use the original rear seat mounting brackets as front anchor points if you replaced the pivot pins within the rear seat brackets.
Besides; if you put that full-size spare on the roof, your MPG is gonna' suck due to the blunt wind drag.
:bgwb:
Marlin
01/03/2011, 05:43 PM
Not to knock on Bart, but I would never "secure" something with bungies. For street use, probably fine, but if you got in an accident or something, that bungie is gonna do its job and stretch, and it certainly isn't gonna stop 60lbs + of wheel and tire. Ratchet straps all the way! 5 bucks at harbor freight, and a lock is a good idea, I lock mine on the roof, and on the rear door.
VXorado
01/03/2011, 06:35 PM
I used the OEM spare tire bracket- placed it on the bottom side of the roof basket and ran a 2-3" bolt through it to the center of the spare rim. Also I fabbed a peice of plastic the size of the rim hub for the bolt to go through and hold the rim to the basket. Hard to explain and I don't have pictures but its pretty simple if you have the oem bracket. I can take of picture if you're interested.
vt_maverick
01/03/2011, 08:17 PM
Not sure if you bought Sue's Thule 695 from her, but if you did you might try this:
http://www.vehicross.info/forums/showthread.php?t=17253&highlight=Thule+696+Yakima+spare&page=8
You can get the Yakima spare kit for $70-ish on the web, required fasteners for about $10 from Lowe's/Home Depot, and bit set (if you don't already have it) for no more than $20. It's more expensive than a bungee set but also a lot more heavy duty. I probably won't ever need the strength for offroading, but I'm pretty sure that if I roll my VX someday I won't be firing a 70 lb. projectile down the highway.
VX KAT
01/03/2011, 10:37 PM
No, I got a Coleman rack included with one of my roof racks. Sold it to Circmand. I can't quite recall the spacing on the floor of the basket, but I think the Yakima spare tire holder could be made to fit, like Mav did.
I sure prefer having a couple chunks of steel holding my 78 lb wheel/tire combo rather than even a ratchet strap. When I was having some custom ratchet straps made (you know the one with purple paw prints on them...isn't that what everybody gets? :goof:)...the manufacturer had about 4 or 5 different products, made of a few different materials, some would actually stretch a few percentage points when wet, some would degrade faster in sun, some colors would run in rain, etc.. They were really inexpensive, even custom made.
http://www.strapworks.com/Default.asp?Redirected=Y
Here's the 6 different types explained:
http://www.strapworks.com/webbing_and_narrow_fabrics_s/20.htm
So just saying "ratchet strap" generically, may not be enough. I'd certainly want to know that I had the strongest ones holding down my tire/wheel.
I have the Yakima spare tire unit AND also a 2" wide polyester ratchet strap holding mine down. Can never be too safe. Bad enough that I've changed the center of gravity a bit by putting that weight up there, so I dayam sure want it to stay up there! :laugho:
http://www.vehicross.info/gallery/data/500/DSC_2738.JPG
http://www.vehicross.info/gallery/data/500/DSC_3027.JPG
http://www.vehicross.info/gallery/data/3260/DSCN1837.JPG
circmand
01/04/2011, 07:26 AM
I even checked autozone. Nothing seems premade. They have tons of plastic crap and chrome tape to PIMP your ride and nothingthat is functional or useful. I think I may check out a few yards and see if imagination strikes.
MSHardeman
01/04/2011, 07:36 AM
Don't know what rack or basket you have for your roof, but I have the Yakima Load Warrior and I use Yakima's spare tire carrier ( http://www.realcyclist.com/yakima-spare-tire-carrier?CMP_SKU=YAK0137&MER=0406&CMP_ID=SH_SHP010&mv_pc=r110&mr:referralID=5af2c7c6-1818-11e0-af68-001b2166becc ) to secure the tire to the basket. Once that thing is sinched down that tire isn't going anywhere, plus it has a place for a lock to keep it from wandering off.
vt_maverick
01/04/2011, 07:55 AM
If I remember correctly (and Sue please let me know if I'm wrong here) the Coleman basket has bars rather than slats for it's flooring, which might work well with the Yakima spare tire kit. The only problem might be if the "hanger pieces" that wrap around the bars are too small, but you may not know that until you're actually looking at it in person. If the bars on the Coleman are of a similar diameter, you still may need to drill some new holes to attach the Yakima plate. But again you won't know until you compare the two racks and the kit.
If I were you (and not to volunteer Sue here ;)) I would meet up with Sue to compare your racks (that sounds pretty funny lol). Just take the Yakima kit off her spare and see if you can mate it up to your Coleman rack.
VX KAT
01/04/2011, 08:10 AM
I have the Yakima Load Warrior and I use Yakima's spare tire carrier ( http://www.realcyclist.com/yakima-spare-tire-carrier?CMP_SKU=YAK0137&MER=0406&CMP_ID=SH_SHP010&mv_pc=r110&mr:referralID=5af2c7c6-1818-11e0-af68-001b2166becc ) to secure the tire to the basket. Once that thing is sinched down that tire isn't going anywhere, plus it has a place for a lock to keep it from wandering off.
Yep, Mark that's the one I have as well as Vt_Mav, can't see it though in my pics. I have the ratchet strap woven through the rim as a 2ndary /backup system.
And for those so inclined....strapworks.com has designs with skulls, bullets, about 5 different camos, and many more. They make them by the foot, so I didn't have a bunch of excess strap to deal with.
VX KAT
01/04/2011, 08:14 AM
If I remember correctly (and Sue please let me know if I'm wrong here) the Coleman basket has bars rather than slats for it's flooring, which might work well with the Yakima spare tire kit. The only problem might be if the "hanger pieces" that wrap around the bars are too small, but you may not know that until you're actually looking at it in person. If the bars on the Coleman are of a similar diameter, you still may need to drill some new holes to attach the Yakima plate. But again you won't know until you compare the two racks and the kit.
If I were you (and not to volunteer Sue here ;)) I would meet up with Sue to compare your racks (that sounds pretty funny lol). Just take the Yakima kit off her spare and see if you can mate it up to your Coleman rack.
Yeah, I think the Coleman had a "grid" pattern of metal bars on the floor, instead of just slats.
And yes, that does sound funny!
Dave, we'll be passing thru your town on 1/14 and 1/16...could check it out then. Or maybe a local off-road shop would have one in person.
Marlin
01/04/2011, 12:07 PM
I am confused by what has happened? What is wrong with a 5 dollar ratchet strap? They are rated to 500-1000lbs static for a 1" strap pending the brand you get. Mine has been on the roof off and on for 2 years, same strap. No degrading of the nylon, no rusting, no problems. The dynamic fail point is much higher.
http://www.ratchetstraps.com/1-x-10-ratchet-strap-s-hook
vt_maverick
01/04/2011, 12:38 PM
I think ratchet straps or the Yakima kit would work equally well. I just like not having the mounting method visible as would be the case with the ratchet straps.
VX KAT
01/04/2011, 02:08 PM
I am confused by what has happened? What is wrong with a 5 dollar ratchet strap? They are rated to 500-1000lbs static for a 1" strap pending the brand you get. Mine has been on the roof off and on for 2 years, same strap. No degrading of the nylon, no rusting, no problems. The dynamic fail point is much higher.
http://www.ratchetstraps.com/1-x-10-ratchet-strap-s-hook
What's wrong with it?...Nothing at all.
I got a 2" wide polyester strap, 7000 lb break limit, custom 5' length for my application, in polyester that won't stretch when wet, has UV protection, and rot and mildew resistance, a heavy duty ratchet mechanism, a buckle pad attached so it can't scratch anything, and a great custom pattern for $14 for two (2) of them. I don't mind it being visible and I still prefer to have two systems securing it. It's redundant but I have the stress points dispersed over several areas, possibly making it a bit more secure. I can't help it, it's my Risk Management background I guess.
Marlin
01/04/2011, 02:10 PM
Gotcha, I just saw a post about some 70 dollar kit, and some fangled spare bracket concept and thought about the K.I.S.S. concept. 5-15 bucks and you are perfectly safe. The funny part is the only thing holding all that stuff on your roof is 4 tiny screws...
VX KAT
01/04/2011, 02:18 PM
Gotcha, I just saw a post about some 70 dollar kit, and some fangled spare bracket concept and thought about the K.I.S.S. concept. 5-15 bucks and you are perfectly safe. The funny part is the only thing holding all that stuff on your roof is 4 tiny screws...
Well I've got the $70 bracket as well as the straps...and yes, the fact has not been lost on me that it's hanging on by 4 screws on a plastic roof rail....:goof:
vt_maverick
01/05/2011, 04:26 AM
...The funny part is the only thing holding all that stuff on your roof is 4 tiny screws...
Thought that many times myself... got to believe those screws would sheer off well before either of these mounting methods gives.
circmand
01/05/2011, 07:03 AM
Yeah, I think the Coleman had a "grid" pattern of metal bars on the floor, instead of just slats.
And yes, that does sound funny!
Dave, we'll be passing thru your town on 1/14 and 1/16...could check it out then. Or maybe a local off-road shop would have one in person.
Please stop while in town. As for a local off road shop you apparently haver never been to Bullhead City. As for straps and bungees I am not ruling anything out I just wanted to see who has done what and if there were any recomendations or warnings. (such as the sun degrading material) as BHC gets a lot of sun
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.