Elec wiring help

[Bob Barker]

I'm wiring in the CREE 10" bar now and I want to use one of the 3 blanks on the left side of the dash. Someone before me put a pod of 3 in there to take place of the fuzzy hole. The on/off button of the light bar's wiring harness has 3 wires from it, 1 power (white) 1 ground (black) and 1 to the relay (blue). If I wanted to wire these three into one of the buttons on the dash already what's the propper pin out to get it to work? I imagine someone here has a photo of the factory style plugs I'm trying to use, if not I'll have to wait until tonight to get a picture of it.

Thanks!

[MSHardeman]

Bob, look here for a switch diagram that Moncha did a while ago. Show what all of the tabs on the back of the stock Tailgate Release switch and Fog Light switch go to.

http://www.vehicross.info/gallery/showphoto.php?photo=1882&size=big&papass=&sort=1

[Bob Barker]

Thanks so much, I think that will apply with the switches in the dash, can't currently remember how many pins there are on those switches.