PDA

View Full Version : Power Mirror switch and Defogger NOT working



VX-Man
03/05/2013, 08:33 PM
Well I did use the almighty "Search" and can't find much more than the CB-5 fuse powers them.
Can anyone confirm that the fuse is the one that was mentioned? I tried looking both Fuse boxes and couldn't find a referenced fuse to them.
Perhaps the switches are bad? :_confused
Thanks for any help.... :thumbup:

Y33TREKker
03/05/2013, 08:35 PM
CB-19? (15 Amp)

Y33TREKker
03/05/2013, 08:36 PM
Or since you said that the defogger function isn't working, it could also be CB-15 (15 Amp)

VX-Man
03/05/2013, 08:48 PM
Thanks! I will check both... and see if it fixes them.. or will look for switches if not...

VX-Man
03/05/2013, 08:57 PM
Nope.. :(
Just check all the fuses in the Dash and they are fine.
Must be the switches.. [Weird that both Mirrors and Defogger for mirrors won't work or will go bad together?]
Oh.. Well.. more to look into..

VXorado
03/05/2013, 09:13 PM
Nope.. :(
Just check all the fuses in the Dash and they are fine.
Must be the switches.. [Weird that both Mirrors and Defogger for mirrors won't work or will go bad together?]
Oh.. Well.. more to look into..

They share a common wire connector under the center console. Probably just a bad connection.

VX-Man
03/05/2013, 09:15 PM
Thanks Rado... Will take the Console apart tomorrow and follow the connection... Appreciate the help..

VXorado
03/05/2013, 10:26 PM
No problem. Hopefully it's just the connector and a quick fix. :thumbup:

VxSport
03/05/2013, 11:26 PM
Hey Rado.... Isn't it the mirror heater switch & the mirror control that share the common wire connector under the center console. The rear window defoger should tie in behind the dash.

just a thought.....


They share a common wire connector under the center console. Probably just a bad connection.

VX-Man
03/06/2013, 03:11 AM
Chris.. thanks for the comment..
I guess I mistakenly called it mirror defogger [when I should have said mirror heater] but yes, those are the switches that are not working.
I will look at the connection today..
Thanks for the pm.. I may get back to you after looking.. :thumbup: