Jason Mooney is THE MAN!

[angeno]

So, with an admittedly skeptical attitude I decided to give Jason Mooney a chance to fabricate a missing interior trim piece that I had zero luck obtaining thru any other resource. It was the plastic piece that fits the seat belt to the B pillar. Can I be honest? If Jason had produced something that even sorta kinda looked like my missing item I would have been very happy. Unfortunately, I am apparently too dumb to figure out how to insert the image of the repaired piece into this email thread. But I am going to email it to Jason so he can post it for me. Let me just say that it is absolutely PERFECT. It snapped right in and it looks EXACTLY like the piece on the other side. It is flawless. I am astounded and delighted. So if you guys need any plastic piece fabricated for your VX, I can enthusiastically and unreservedly recommend Jason. Seriously, I could not be happier! Thanks Jason. You made my day!

:yesy:

[jasonm621]

Picture as described above! Thanks again Geno! Looking forward to making more VX parts in the future!

http://www.vehicross.info/gallery/data/500/photo_1_1.JPG

[Ala5ka]

thats awesome man! can you make custom parts like half pieces and headliner trim potentially for people who have removed their interior panels and want a cleaner look?

[VXD959]

I would like to know if the front / rear skid plates can be made out of plastic.
I would buy them! And I know there is interest out there from others!!

http://vehicross.info/forums/showthread.php?t=23140&highlight=front+skid+plate

[evillecutter]

skid plates like the ones from the vx-02 - even non functional - would sell like hot cakes

[nfpgasmask]

Hmmm, well, that is really cool. How do you do it? Do you make a mold from an original part and then cast it in plastic? Or do you have access to injection molding machines? I would love to replicate 1st gen Trooper black glove box doors.

Bart

[JoFotoz]

I'll let Jason answer the tech questions about his 3D printing...... :_thinking

Suffice to say...his product is GREAT.
Prices are reasonable, and service is fast!


jo

[Anita]

:clap::thumbup::clap:

[VX KAT]

Jason's goin' be busy!!! :thumbup::thumbup::thumbup:

[jasonm621]

Hmmm, well, that is really cool. How do you do it? Do you make a mold from an original part and then cast it in plastic? Or do you have access to injection molding machines? I would love to replicate 1st gen Trooper black glove box doors.

Bart
The process is pretty simple actually, although it does take some time...
-Make a mold of the original part
-Fill mold with colored resin
-Demold!
Possibility's are endless but a realistic build envelope for my ability are parts no larger than a bread box... So at this exact time those skid plates are probably beyond my abilities.:(
Thanks to all the outstanding VX members here are some other projects that I have tackled with great success::yesy:

-Spare tire cover knobs and Yakima rack screw covers:

http://vehicross.info/forums/showthread.php?t=23517&highlight=yak+flaps

-VX Emblems and other custom emblems for the Line-X people:

http://vehicross.info/forums/showthread.php?t=23894&highlight=3d+printed

http://vehicross.info/forums/showthread.php?t=24259&highlight=VX+Emblem+moab

http://vehicross.info/forums/showthread.php?t=24295&highlight=ORW

http://vehicross.info/forums/showthread.php?t=24304&highlight=line-x

Thanks for all the interest! Future projects to come!!! Suggestions, ideas, and constructive criticism are always welcome!

[EVO]

He doesn't just replicate parts......he makes them much mo' betta!!!! Thx again for helping the VX community!!!

[VX KAT]

.
I just updated this thread with the colored VX emblems he sent to Moab with me.

http://vehicross.info/forums/showthread.php?t=24259&highlight=VX+Emblem+moab

Got several colors available.
.

[evillecutter]

can you make me some seals for our transfer case? i know the answer is no but i had to ask anyways

[jasonm621]

can you make me some seals for our transfer case? i know the answer is no but i had to ask anyways
Anything is possible, Although I woulnt want to touch a project with that risk/liability if it were to fail. Sorry but id prefer to stick to the cosmetics...

[Marlin]

Roof rail covers with the crossbars installed would probably be a good seller. I would like a dual ac outlet cover that fits the cd changer slot:) That way, you can hardwire an inverter and move the outlets to the panel for a clean install.

[Mile High VX]

Roof rail covers with the crossbars installed

I have a set of rail covers that have the cut outs for the crossbars if you need a set for a template...:bgwb::bwgy::smilewink:bgwo:

[Scott Harness]

Just got my VX emblem in the mail.
Excellent quality...looks GREAT and super fast service
Thanks Jason...I highly recommend his products!:yeso:

[SilverBullet75]

I ordered some spare tire knobs in black from Jason. He shipped them real quickly and the quality of the product is awesome! Installed in 5 minutes. Thank you Jason!
:)
JIM

[jasonm621]

I have a set of rail covers that have the cut outs for the crossbars if you need a set for a template...:bgwb::bwgy::smilewink:bgwo:
That would be an AMAZING HELP! I'll PM Ya!

[VX KAT]

Remember I still have several colors of VX emblems that Jason made.
Email me if interested so he doesn't have to make them again! $10 +$4

Bright Silver
Lighter gray

Lighter Yellow XXXXXX
Lighter Blue
Darker Blue - although it cracked apart in the center (Jason, can it be superglued?) $5
Lighter Orange
Darker Orange
Lighter Red
http://www.vehicross.info/gallery/data/500/VX_EMBLEMS.jpg

[lopezji]

I ordered Spare Tire Knobs too. They are Great! How about roof rack towers? I'll take a set of rail covers too if you ever make them.
Thanks for the help Jason