View Full Version : Power Mirrors JDM vs USA compatible?
Jheyson VX
10/01/2014, 06:19 AM
Hello ,
I just have a quick question.
Are the JDM mirrors compatible with our USA based power mirrors?
I may sell my power mirrors to a member who has a JDM model VX , and
he wants to know if they are compatible.
thanks in advance,
Y33TREKker
10/01/2014, 07:36 AM
Best way for both of you to know for sure is for each of you to take a mirror off the same side of your vehicle (regardless of which is considered the "drivers" side) and look at the electrical connector. If both have the same colored wires at the same pinouts, you should be good to go.
If they are different, someone with a JDM model factory electrical manual would have to chime in about any differences.
In the US version, both the right and left mirrors appear to have the same wire colors in the electrical connectors.
Left Door
Connector D-6 (Directional motors)
Pin 1 - Red
Pin 2 - Black
Pin 3 - White
Connector D-7 (Heater/Defroster)
Pin 1 - Black/Green
Pin 2 - Black/Red
Right Door
Connector D-15 (Directional motors)
Pin 1 - Red
Pin 2 - Black
Pin 3 - White
Connector D-16 (Heater/Defroster)
Pin 1 - Black/Green
Pin 2 - Black/Red
Triathlete
10/01/2014, 09:58 AM
.
Jheyson VX
10/01/2014, 01:05 PM
Thank you so much for the specific details about the mirror.
I appreciate it Y33TREKker. That is a big help . Actually , I just sold the
mirrors to another member who has the USA version VX. Anyway , I will have that info for future reference.
Best way for both of you to know for sure is for each of you to take a mirror off the same side of your vehicle (regardless of which is considered the "drivers" side) and look at the electrical connector. If both have the same colored wires at the same pinouts, you should be good to go.
If they are different, someone with a JDM model factory electrical manual would have to chime in about any differences.
In the US version, both the right and left mirrors appear to have the same wire colors in the electrical connectors.
Left Door
Connector D-6 (Directional motors)
Pin 1 - Red
Pin 2 - Black
Pin 3 - White
Connector D-7 (Heater/Defroster)
Pin 1 - Black/Green
Pin 2 - Black/Red
Right Door
Connector D-15 (Directional motors)
Pin 1 - Red
Pin 2 - Black
Pin 3 - White
Connector D-16 (Heater/Defroster)
Pin 1 - Black/Green
Pin 2 - Black/Red
Y33TREKker
10/01/2014, 04:08 PM
While the info I included is fresh, you might suggest that the member with the JDM VX go ahead and take one of the mirrors off to check the wiring connector colors, then post the info here just for future reference.
The wiring in the JDM mirror will be different.
The JDM mirrors are heated, and are powered back into a stowed position when you park.
The USA units only have one of those features, but I can't remember which.
PK
Triathlete
10/01/2014, 07:09 PM
Heat
johnnyapollo
10/02/2014, 03:26 AM
They were entirely redesigned for the US market, from what I've read.
blacksambo
10/02/2014, 10:25 PM
Good stuff.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.