bertomatic
10/20/2014, 10:46 AM
Did a brake upgrade this past weekend, rotors, pads, lines, flush and bleed, repacked front bearing grease. Only issues were getting the bearing retainer off, needs some special tool I did not have. tapped/spun it out with a screw driver, carefully but seemed to work ok. and the nut on the 5th line was loose from goodridge and was leaking, once I tightened it up, all is well.
Big improvement. much more confidence in them now.
From JC Whitney ($430):
----------------------
Centric Slotted Rotors, CE126.43013SR, CE126.43013SL, CE126.43015SR and CE126.43015SL.
EBC Greenstuff 6000, DP6973 and DP6974.
From Amazon ($138):
------------------
Goodridge 23042 Brake Line kit
From O'Reilly Auto Parts ($40):
------------------------------
National Oil Front Bearing Dust Seals (qty:2) 710168
Big bottle of O'Rilly brand Dot3 brake fluid
3 cans brake cleaner (green)
1 tub of bearing grease (red)
NOTE: if your lifted, the SS lines might be too short.
Big improvement. much more confidence in them now.
From JC Whitney ($430):
----------------------
Centric Slotted Rotors, CE126.43013SR, CE126.43013SL, CE126.43015SR and CE126.43015SL.
EBC Greenstuff 6000, DP6973 and DP6974.
From Amazon ($138):
------------------
Goodridge 23042 Brake Line kit
From O'Reilly Auto Parts ($40):
------------------------------
National Oil Front Bearing Dust Seals (qty:2) 710168
Big bottle of O'Rilly brand Dot3 brake fluid
3 cans brake cleaner (green)
1 tub of bearing grease (red)
NOTE: if your lifted, the SS lines might be too short.