PDA

View Full Version : Drives fine without ABS module



DaveMcKenz
04/15/2017, 12:42 PM
Hi guys,
I pulled and sent my ABS module off for rebuild today. That task required a little jiggling and frustration. Anyway, I was putting off the job because my VX is my daily driver, and I was afraid it would not be very driveable without the module.
I was pleasantly surprised that the car drives fine. I didn't try to push it, but for around town errands etc., it seems no different than before.
I used ASI for the rebuild.
Good luck,
Dave

Mile High VX
04/15/2017, 05:03 PM
I did the same. The only issue I had was a full lock turning into parking spaces. Other than that it drove normally.

DaveMcKenz
04/22/2017, 06:42 AM
Hi again, guys.
I wanted to give a thumbs up to Automotive Scientific Inc. in Rogersville TN. Very fast turn around and fixed my ABS Module solenoid fault. Car drove fine during the module's absence so speed not really an issue.
Dave

Mile High VX
04/22/2017, 07:24 AM
Ditto..they did mine years ago and still going strong.