PDA

View Full Version : Rear speaker access



crager34
02/21/2005, 09:18 AM
Did the search and found little information. Can someone highlight how to take the rear panels off to access the rear speakers? I have only seen the two plastic pins loacted at the top of the upper panel and not sure if that is all. Speakers seem a bit tough to get at on the VX.

Thanks

SU-Vehi
02/21/2005, 11:23 AM
Very Carefully. The rear panels are a day-long job. Let me tell ya. There's a million of the little panel tabs that need to be popped off. I'd go buy about 2 dozen of them before you start the process as you'll lose many of them. I cant recall the exact procedure as I havent had mine of since 2003, but just take your time and have lots of patience. Dont try to rush it!

kpaske
02/21/2005, 12:04 PM
Detailed instructions are available in the VX Workshop Manual, which is available on Tone's website. Look under:

8. Body and Accessories
+ 8J. Exterior / Interior Trim
+ Interior Trim Cover and Assist Grip

Moncha
02/21/2005, 12:07 PM
Here's a post on dynamating that has some photos to help too.

http://www.vehicross.info/forums/showpost.php?p=53666&postcount=8

dkmiller68
02/21/2005, 12:26 PM
I sent you instructions how to do the job (Check your yahoo address)...hard part is the upper seat belt...it requires a torx bit (size 50 or 55).

crager34
02/21/2005, 02:19 PM
Received the email dkmiller and thanks to everyone for the other infomation.