Skid Plate

[tomdietrying]

I bought my VX, and it came with the skid plate. The problem is it was never installed and there were no screws for it. I do know the thread size is 6mm. It takes four hex 6mm screws, but does anyone know what the length of the screws should be? Also when I install it sould I put a rubber washer, a locl washer, or no washer with the screw? Thanks.

[Reg Hinnant]

Do a serch on skid plate. In the post about it we had part # for the plate and screws. I dont remember how long the screws were but you can find out with the part #.

[Moncha]

try this one;

http://www.vehicross.info/forums/showthread.php?s=&threadid=438

[tomdietrying]

Sorry, I didn't make myself clear. This is one of Ron's skid plates. It looks like the skid plate on the VX-02. I know it attaches with a 6mm bolt, but I still don't know what the lenght of the bolt is. Thanks for the help.
Tom

[AlaskaVX]

I would e-mail Ron