Hey - I need a favour

[moon buggy]

Pls ..I need to get to the bottom of the door check pin issue from my previous posts..SO I need somone in the US [as I'm trying to get StCharles to source the part]..to get a hammer and a pair of pliers {sp?] tap the door pin up, pull it out, slide out the section that comes from the door and look to see if the US models differ from the JDM [pls take a digital pic and post]..its 3 min job and can be done by yourself, as the door is still held by the 2 main top /bottom hinges..when I did mine ..5 x now, to protect paint from waywould hammer taps or plier movement i used a lid off a cardboard box to shield the paint..as I said a very easy job so i hope someone is game..I have attached pics below of the 'door check pin assembly' and arrows point to the plastic/nylon bushes placement [this is the part I want]..the 'bush' is needed to cushion the pins movement within the fixed bracket off the car body pillar...when using the door...I checked the CD manual that I have of the US VX it doesn't mention this part ..but then its not as detailed as I thought it may have been...SO pls I hope someone can help

http://www.vehicross.info/gallery/data/515/thumbs/110_1063a.jpg (http://www.vehicross.info/gallery/data/515/110_1063a.jpg)http://www.vehicross.info/gallery/data/515/thumbs/110_1061a.jpg (http://www.vehicross.info/gallery/data/515/110_1061a.jpg)http://www.vehicross.info/gallery/data/515/thumbs/110_1065a.jpg (http://www.vehicross.info/gallery/data/515/110_1065a.jpg)

[mbeach]

This might help:
https://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=715&chapter=ARO4628&appSectionid=3263&groupid=51895&subgroupid=2392&componentid=2312&make=15&model=Vehicross&year=2001&graphicID=4628370&callout=24&catalogid=2

[Moncha]

It looks like you have the right part pictured... If no one beats me, I'll do it tonite after 9pm my time when I get off work...

[moon buggy]

Mbeach
thanks heaps for the link [saved !!], see below I have taken a chunk of that pic and shown where my nylon/plastic bush goes...the diagram on the site talks of a 'nut' [27] that goes there but look at my pics you can see that that [in JDM case] is the nylon bush ..it sits down in that loop forming a cushioning sleeve..then that whole mechanism slides back in to the bracket on the door pillar and then the 'check pin' [28] slides down thru the lot to hold it all in place...

http://www.vehicross.info/gallery/data/500/thumbs/hinge_diagram.jpg (http://www.vehicross.info/gallery/data/500/hinge_diagram.jpg)
http://www.vehicross.info/gallery/data/500/thumbs/hinge2.jpg (http://www.vehicross.info/gallery/data/500/hinge2.jpg)

Moncha I'll take you up on the offer..I am hoping Isuzu didn't change the design for the US model..

Thanks Again

[moon buggy]

bump, if someone's feeling adventurous to settle one life's great mysteries of the popping door !! Thanks