sway bars and trans. interceptor??

[jgrish]

I was just wondering if anyone has upgraded their bars and how it turned out. What exactly is a trans interceptor and is it worth the mod?

[Cyrk]

I got my Swaybars from Calmini they are 40% stiffer than stock bars... so they say, but they are the same size in diameter.

http://www.pureisuzu.com/sway_bars4.htm

trans interceptor is an electronic shift kit that plugs into your transmission and has adjustable pots to to firm up line delay and torque lockup. You will feel a crispness when you are shifting and it is adjustable to the firmness of your choice.

I think that both these are a good upgrade, they have been good to me. ;)

-Dave

[blenke]

I put the Calmini bars on and they were a definite improvement in the "roll" of the car body when cornering. The trade off is a moderately rougher ride. As far as size mattering, the rear bars are almost the same size in diameter, but the front bars are about 50 percent larger in diameter.
A shot of the front sway bar......http://www.vehicross.info/gallery/data/500/thumbs/CALMINI_SWAYS.JPG (http://www.vehicross.info/gallery/data/500/CALMINI_SWAYS.JPG)

[H3_VX]

I copied this from an archived thread.....

"The VehiCROSS sports a double wishbone, independent front suspension using torsion bar springs with a 1.1" stabilizer bar.
The rear is comprised of a 4-link suspension using coil springs with a .75" stabilizer bar."

Are these the measurements I should provide a shop with who is asking for my sway bar diameters. On the advice of Breezy i'm gonna try some energy suspension sawy bar bushings to make a little better ride.

[Ldub]

Are these the measurements I should provide a shop with who is asking for my sway bar diameters. On the advice of Breezy i'm gonna try some energy suspension sawy bar bushings to make a little better ride.

I believe Boss Mans write up, with part #'s & everything, is in the knowledge base or how to's...or somewhere...:yesgray:

Search = friend...:smilewink

[vxfocus]

anyone know where to get the trans interceptor???

[espidus]

I double that...

[Ldub]

I copied this from an archived thread.....

"The VehiCROSS sports a double wishbone, independent front suspension using torsion bar springs with a 1.1" stabilizer bar.
The rear is comprised of a 4-link suspension using coil springs with a .75" stabilizer bar."

Are these the measurements I should provide a shop with who is asking for my sway bar diameters. On the advice of Breezy i'm gonna try some energy suspension sawy bar bushings to make a little better ride.


I believe Boss Mans write up, with part #'s & everything, is in the knowledge base or how to's...or somewhere...:yesgray:

Search = friend...:smilewink

Here ya go...not where I thought it was, but part #'s are in here (http://www.vehicross.info/modules.php?name=Content&file=viewarticle&id=66)...:yesgray:


anyone know where to get the trans interceptor???


I double that...

AFAIK, the company is no more...:(