PDA

View Full Version : MAF sensor and Air Cleaner



ThunderChicken
10/13/2005, 04:57 PM
Got the VX tuned today and still having problems. Engine light is still on with a 0107 reading. I got to looking under the hood and found that my air cleaner is clogged with all kinds of dirt and debris. Looks like I need a new one.

Auto Zone told me that I needed to replace my MAF sensor to get the 0107 code off of the computer.

I need some help. The car idles still idels rough and it's a lot harder to start. Up until a few days ago all I had to do to start it was to turn the key. Now it winds.

As you know the MAF sensor ain't cheap.
What do you guys think?

Dare2Dream
10/15/2005, 01:27 PM
You could clean the MAF. From what i've heard, it is quite easy to clean. Search this site and you'll find some threads on this topic.

Syntek VX
10/17/2005, 09:14 AM
Try cleaning it. Just pull it out and spray it with electronics cleaner then reset your comp by unplugging the battery for 15 min. If it's still showing the code have them clear the code and try reseting again if that doesn't work you might need a new MAF. Also check that the plug is seated all the way and that the connectors to the MAF and plug are clean.

Jolly Roger VX'er
10/03/2006, 03:49 PM
:fyi:

http://www.crcindustries.com/auto/content/prod_detail.aspx?PN=05110&S=N

http://www.popularmechanics.com/automotive/how_to/3297276.html

http://www.amazon.com/CRC-Mass-Flow-Sensor-Cleaner/dp/B000EGH57G

CRC Mass Air Flow Sensor Cleaner is the safe and effective alternative to "underground" methods of MAF sensor cleaning. Dont use aggressive chemicals like brake parts cleaners or carburetor cleaners on MAF sensors. These can cause serious damage to sensitive parts. Use CRC MAF Sensor Cleaner -- Its the right product for the job! It safely and easily cleans the MAF hotwires and electrical components without damage to the wires or plastic housing. Cleaning is simple, safe and fast. The whole job should take less than 10 minutes! Mass Air Flow Sensor Cleaner benefits and features: - Safely cleans and protects MAF Sensors - Plastic-safe and leaves no residue - Increases horsepower - Decreases hesitation and pinging - Improves fuel economy and MPG - Reduces rough idle.Use every time you clean or change your air filter

AREA 51
10/04/2006, 09:16 AM
Get a refund on that "tune-up".