PDA

View Full Version : Serpentine Belt Tool


mrlegoman
10/27/2006, 05:24 AM
I've read through all the serpentine belt topics but still cannot find exactly what type of tool to get.
Do I just look for a serpentine belt wrench in a 14mm?
Tone
10/27/2006, 05:54 AM
14m socket and long ratchet (or long offset 14mm box end wrench) although there are those here who do this without any tools!
SilverBullet75
10/27/2006, 08:57 AM
I did mine using a 14 and a 3 foot (1/2 in) Breakerbar :).
Worked very well.
mrlegoman
10/27/2006, 09:45 AM
14m socket and long ratchet (or long offset 14mm box end wrench) although there are those here who do this without any tools!
I tryed doing it the "no tools" method, but with no luck. I was not sure if you could use a regular 14 or if it had to be some special wiz-dandy serpentine 14.
Thanks!!
k4tmc
10/27/2006, 10:01 AM
I just did mine last week, "piece of cake" with a 24 inch torque wrench to move the tensioning wheel. I would recommend having someone to help do the job. That way one can hold the tensioning wheel, while the other person gets the belt on the other wheels.

Henry
mrlegoman
10/28/2006, 07:45 AM
The only belt that AutoZone carries is the 6PK2275.
I could not get this belt to fit. Am I doing something wrong? Is there something I need to adjust to get the 2275 to fit?
Ldub
10/28/2006, 07:55 AM
This may or may not be of any help...

http://www.vehicross.info/gallery/data/500/belt.jpg


Also, did you hold the two (new & old) belts toghther & compare them for length ?

Just a couple of possibilities.
mrlegoman
10/28/2006, 08:50 AM
That picture is awesome. Wish I had that about six months ago.

Yes, the old belt is a 2288 and the new one is a 2275, just 12mm difference. I have the tensioner cranked as far as it can go and the belt still does not want to slip on. Do I need to just force it a little bit? I'd hate to do damage to the belt trying to get it on. Everyone says how easy it is to slip on, so I feel that I'm doing something wrong.
Ldub
10/28/2006, 09:30 AM
Sorry to say but...

It's only easy to slip on if you have the right size belt...12mm doesn't sound like much, but apperently, it's enough. :(
mrlegoman
10/28/2006, 12:52 PM
From the other serpentine belt and general maintenacne threads I've read, everyone is using a 2275 belt. How do they do it?
Navigator
10/31/2006, 08:47 AM
From the other serpentine belt and general maintenacne threads I've read, everyone is using a 2275 belt. How do they do it?

Stand directly in front of the VX with the hood up of course, reach in, grab the top of the belt and pull straight up and over the top wheel towards the front of the vehicle. Then reverese the technique for the new belt install. It requires only moderate upper body strength.
kpaske
10/31/2006, 10:50 AM
I struggled with this quite a bit the first time I did it. Now that I know the technique, I can do it by myself, but I would suggest having a second person nearby. You'll save yourself from turning what could be a 5 minute job into several hours of bruised knuckles and smashed fingers (and many curse words ;)).

The problem with this job is not that you need a lot of strength, or that the technique is that difficult, the problem is we only have 2 hands and it's so much easier with 3!