PDA

View Full Version : New Wheels


darkl4805
11/20/2006, 01:27 PM
Picking them up and having them installed next Monday.

http://www.discounttire.com/dtcs/findWheelDetail.do?rcz=84109&rc=UTSINT&mk=ISUZU&yr=1999&wd=16&sw=false&dVeh=dVeh&pc=52081&rw=&bp=&vid=005318

Any thoughts?
VXD959
11/20/2006, 01:43 PM
Great! Please send pics when done.

I have a 2000 and need 18's. Will this one fit?

http://www.discounttire.com/dtcs/findWheelDetail.do?rcz=84109&rc=UTSINT&mk=ISUZU&yr=1999&wd=18&dVeh=dVeh&pc=55062&rw=&bp=&vid=005318
nfpgasmask
11/20/2006, 03:27 PM
Not with that bolt pattern. You need 6x5.5.

Bart


Great! Please send pics when done.

I have a 2000 and need 18's. Will this one fit?

http://www.discounttire.com/dtcs/findWheelDetail.do?rcz=84109&rc=UTSINT&mk=ISUZU&yr=1999&wd=18&dVeh=dVeh&pc=55062&rw=&bp=&vid=005318
etlsport
11/20/2006, 03:57 PM
you can put the 16s on ur '00 vx, you would just need to get different tires
rowhard
11/20/2006, 04:36 PM
You can also step up to the 20. It will move the wheel outboard about 1/2 inch. Like most, some trimming will proable have to happen. I have been looking at this wheel for some months, my problem is that I don't care one damn bit for Discount Tires and they are the only one's that sell the MB's
MIDN USNA
11/20/2006, 07:48 PM
I am an assistant manager at dtc in wichita falls tx. Those predators are much better than the blitz, go all out and go for the chrome. I cant tell you how many times my guys f'up that machined finish. For anyone who is going to do some offroading i would strongly discourage against a machined finish.
Ldub
11/20/2006, 09:09 PM
Great! Please send pics when done.

I have a 2000 and need 18's. Will this one fit?

http://www.discounttire.com/dtcs/findWheelDetail.do?rcz=84109&rc=UTSINT&mk=ISUZU&yr=1999&wd=18&dVeh=dVeh&pc=55062&rw=&bp=&vid=005318

They'll probably fit, I see you've got the proper info. input (the 8-hole'r pic is just the one they have a pic of) but if they have that same offset, they'll most likely stick out of the fender wells.
Beauty wheel BTW.
E-ZooZoo One
11/22/2006, 08:47 AM
Beautiful wheel!

http://www.discounttire.com/product/wheels/mbmbli.mm.ang.jpg



But is the hub opening large enough?

http://www.discounttire.com/product/wheels/mbmbli.mm.cap.jpg