Front Seat Belt Torx Bolt

[darkl4805]

I'm having a hell of a time removing the passenger seat belt torx bolt. I have the T50 bit and had no problems at all with the drivers side. I've put the bit in my drill and tried on full blast and thing won't turn. I then get that wonderful burning smell coming from inside the drill because it's on full power and nothing is moving.

Any suggestions for getting this bolt out or should I just drill it and get a new one? I was wanting to sound deaden the VX this weekend.

Thanks in advance

[Ruflyf]

a socket style torx and a good ratchet style breaker bar.

[Richard039]

Not tried it myself but some seatbelt bolts undo by turning them the other way, clockwise

[johnnyapollo]

Use an impact driver with the bit in an impact socket - manual drivers are less than $20 these days.

-- John

[MZ-N10]

i too had a hell of a time removing the bolts....i ended up pushing against a 2' breaker with all my weight, and have a friend turn it, it loosened up and finsihed the rest of teh job with a 1/2".

btw the bolt looses ccw

[darkl4805]

Using a breaker bar ended up working. I ended up pushing on it with my weight while my wife hung from the bar. Took about 7-8 1/8th turns before it was loose enough to use the drill w/the bit.

Thanks for the advice.