Results 1 to 8 of 8

Thread: is this normal??

  1. #1
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0

    is this normal??

    changed my oil today.. as i was putting the bottles of used oil in a bag a couple hours afterwards to get ready to take them up to be disposed of.. i noticed at the bottom of a couple of the bottles there looked to be sediment of some kind.. when i turned the bottles over they kind of looked like air bubbles.. the biggest deposit of it was in the last bottle i poured.. i heard somewhere that sometimes metal shavings showed up in oil before engine failure ... i really am paranoid about my VX.... anyway, im gonna take the oil to a shop tomorrow and have a mechanic take a look at it just in case, any ideas what it might be that i could suggest? i plan on taking a magnet to it later to see if that has any effect (ie look for metal in it)

    forgot to mention.. this was my third oil change with quaker state 4x4 synthetic 10w30
    Last edited by etlsport : 02/18/2007 at 07:05 PM


    "Engineers believe if it ain't broke, it doesn't have enough features yet"

  2. #2
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    If it is metal you can determine that easily with a magnet.
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  3. #3
    Member Since
    Mar 2006
    Location
    2001 FOXFIRE 0579
    Posts
    887
    Thanked: 0
    i havent done it to my vx yet, but i have put a drain plug with a magnet on it in all my other trucks and cars. is there one available for the vx??
    this would help on the next change sport, to see if there are more shavings in the oil\pan on the next oil change.........

    .02

  4. #4
    Member Since
    Jun 2002
    Location
    1999, Ebony Black, VX ,1976
    Posts
    815
    Thanked: 0
    You will find out more by cutting open the filter than looking at the oil from the pan. shawn
    1COOLVX

  5. #5
    Member Since
    Jun 2002
    Location
    2001, Proton Yellow, #0580
    Posts
    1,887
    Thanked: 5
    Could be water in the oil (it sinks to the bottom) - notice any rust on your dipstick or around the filler?

    -- John
    John Eaton
    Original Owner
    2001 Proton Yellow #580
    Atlanta GA

    http://wildtoys.com/vehicross/
    http://vehicross.blogspot.com/

    "Metaphors be with you"

  6. #6
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    Quote Originally Posted by johnnyapollo
    Could be water in the oil (it sinks to the bottom) - notice any rust on your dipstick or around the filler?

    -- John

    OOOOO thats a very distinct possibility.. it started snowing after id drained my oil.. so i went inside and left the pan under the vx for like 30 min w/ the hood still popped... so im sure some snowflakes got into the drained oil... phew.. thats a releif.. im still gonna have it tested to be safe but ill sleep easier tonight.. ill also be cutting the oil filter in half.. kinda curious about the inner workings of it

  7. #7
    Member Since
    Apr 2006
    Location
    2007 Suzuki V-Strom 650
    Posts
    233
    Thanked: 0
    If you're really worried, spend the $30 or so and send a little oil off to one of those oil analysis shops. They'll tell you for sure what it is.

    edit: and then I notice where he says he's going to have it tested ...

  8. #8
    Quote Originally Posted by Tobert
    If you're really worried, spend the $30 or so and send a little oil off to one of those oil analysis shops. They'll tell you for sure what it is.

    edit: and then I notice where he says he's going to have it tested ...
    You'l probably get them back with a note atached: Chemical waste!
    VX : CLOSEST THING TO A CONCEPT CAR!

Similar Threads

  1. Is this normal
    By bssage in forum VX Talk...
    Replies: 14
    Last Post: 08/14/2012, 06:55 AM
  2. Is this normal?
    By ibmx2 in forum VX Talk...
    Replies: 11
    Last Post: 09/23/2010, 08:26 AM
  3. OBD II ScanGauge II What's Normal?
    By Techy-D in forum VX Troubleshooting...
    Replies: 12
    Last Post: 06/25/2008, 11:47 AM
  4. Is this normal?
    By Mikeys00vx in forum VX Troubleshooting...
    Replies: 8
    Last Post: 11/20/2005, 08:58 PM
  5. Floorboard normal?
    By Heraclid in forum VX Talk...
    Replies: 3
    Last Post: 05/05/2003, 11:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails