They are tape on youhave to have them order it. I did not llike the way the weathertecs fitted.
I just did not want to hinder the window when it was rolling up in the track due to windows that are sticking as it is also I smoke and like to vent the smoke out the window by holding the cigarette at the top of the window. The weathertec provides less space. Just a personnal preference
Sorry..I thought you said you got a new one ....MY BAD...you just fixed it..
DUH
[SIGPIC][/SIGPIC]...
yep it was mine that was off... not by much, heres a shot of the passenger side (the one that is off) and the drivers side (which was a good fit) I had to shave about 1/8-1/4" off of the end of the passenger side to get it to fit like it does now, when i got them (ordered from e-bay) the passenger side just wouldnt go because that tab was not lined up and would get in the way
my tip for anyone doing the scangauge thing... use a dremel to get close.. but do that last 1/8 inch by hand with some sand paper on a wood block then just test fit, shave a bit off, test fit etc until it fits snugly
You Bart you...I thought to suggest the same thing. Ship "em to one of us, and have them sent to you.
I too love my weathertech's...I've had them 3 yrs...awsome
The weathertecs do not cause my window problems its that little design issue I just did not want to make it worse or have the motor have to wok any harder. I also beleive in buying local when the shipping is likely to cost more than the product if you have to pay to get it then ship it back and then to recieve a second pair.