Supercharger 101

[Ldub]

CAn anyone tell me where to find the pictures that are on this post? I am trying to validate my vacuum hose routing and connection for my Alpine M62 supercharger.

[44ficus44]

its prob in ehre but are these alpine superchargers Screw or roots/blower stule ??

[VXCanada]

Looking for info on the drive belt for the SC and tensioner pulley.

What is the length of the belt (should be printed on it) and the pulley make/brand?

Thanks,

T.

[Cable Bob]

Would anyone happen to have the photos for this post? I did contact WormGod direct; he told me he no longer had the photos but he thought that someone from this site may have archived them. If you have them please let me know. I'll be needing them in the near future.

[circmand]

There is really no need to do a quote on long posts. It just clogs the site with repeated data that is already available

[Cable Bob]

That was over three years ago... I'm just looking for the pictures to accompany this post.

[Knigh7s]

UPDATE: Recreated the page in the vx-wiki with the images.

I have them, but they are on my computer at home... I'll let you know when I get home from work.

That was over three years ago... I'm just looking for the pictures to accompany this post.

[Cable Bob]

Thank you so much Knigh7s, that is what I need and you came through. You guys on this site are the best!

[Jay Dunford]

I have them printed out with the pictures and will send with the SC.

I do not have the original Alpine instructions however, so if someone has those that I can either copy or scan in to send to Bob I would greatly appreciate it.

[Cable Bob]

Got the Alpine Instructions from Jay so I'm good.... for now. If anyone has some good advice before installing the Supercharger please let me know. Jay is leaving the injectors in place, I'm changing the thermostat, replacing the snout coupler and seal before installation.

[Ldub]

I have them printed out with the pictures and will send with the SC.

I do not have the original Alpine instructions however, so if someone has those that I can either copy or scan in to send to Bob I would greatly appreciate it.

I'm still come'n up empty handed on this end Jay, they weren't where I thought they were when we last spoke. If I DO find them in the days to come I'll post em'.

IIRC they were vague @ best...as in: If you have Garys write up in it's entirety, you have a FAR better shot @ getting it right on the first try.. .

I might recommend a new set of sparkly plugs for the old gal...just cuz.

[Cable Bob]

What type of plugs? Just stock ones? Lower temp like they came from Alpine?

[Knigh7s]

I think I got the instructions from BeeVenom a couple years ago.

Here's the link. I wouldn't really even bother with it as LDub said above. Pretty Vague.

[Ldub]

What type of plugs? Just stock ones? Lower temp like they came from Alpine?

I use stock heat range NGK Iridium