Anyone know where I can get colored upper light bulbs for the dragon horn part of the highlight assembly?
Anyone know where I can get colored upper light bulbs for the dragon horn part of the highlight assembly?
The least expensive way to get colored bulbs for the horn lights is to go to Home Depot or Lowe's and buy colored bulbs for Malibu outdoor lighting. They fit right in, and you can safely double the wattage (to 8W) without fear of melting the housing.
"If you're not living on the edge --- you're taking up too much space!!"
The autolumination.com site is THE BEST! I emailed them and negociated a disocunt on my next order (that I placed tonight). I've changed the horn lights out and the inside dome light so far. I'm so satisfied with those that I have decided to replace all lights on the VX to LEDs. All together (once my new order is received), all lights will be replaced with the following:
*Dome Light
6 LED Super High Flux
39mm, Blue
9.99/each
*Horn Lights
*Front Side Marker Lights
*Rear Side Marker Lights
T10 Wedge
Item # SMT Tower Color: Blue
Lens: 194
$9.99/each
*Small Round Front Parking Lights
194 6 LED Clear Focused Lenses, projects light forward like a flashlight
UV (purple)
$4.99/each
*Interior Map Lights
Super White, 9 LED
39mm
$6.99/each
*Front Turn Signal Lights
*Rear Turn Signal Lights
20 Powerful Wide Angle High Flux LEDs
Amber
$17.99/each
*Back Up Lights
The Beacon, advertised as perfect for back up lights
1156 Ba15s Base 50 watt Xenon Super White
*License Plate Lights
194 (Super White) Xenon
$1.49/each
---------
Ty
ty.. dont forget that when you change your turn signal bulbs you will need to get a load equalizer or a new flasher, they work on building up a charge and when there is enough charge to light up the bulbs, it discharges and lights the signals.. LEDs draw significantly less power, so it will discharge almost instantly... ie your turn signal will flash crazy fast like if you had a bulb burnt out.. pull one of your turn signal bulbs out and then turn on your signal to see what i mean
etlsport,
wow, I didn't know that. I don't know what a load equalizer is. Would this be something autolumination.com would have and is it easy to install? This is all new to me. Thank you very much for the advice. If this is really difficult I'll just cancel those bulbs on my order.
Thanks alot,
Ty
can these damage plastic in there or no?Originally Posted by tysamigo
I changed my order and omitted the load equalizers to get the Flasher EP34 instead.
Any instructions on flasher replacement available?
Regarding:
-------
can these damage plastic in there or no?
-------
I'm not sure. I hope not....