Diff Drop Brackets

[CrnCnn]

but when I was recently at the scrapyard looking under some troopers, they looked identical. You could pull them, then have a fab shop cut and weld them

So how positive is anyone that they are the same? I really want to do the way you did because I don’t like the pain of tracking down CV's or the cost. How much did you relocate your brackets? A friend of my parents is a really good welder and builds hot rods and stuff so he could do them just a matter of getting them and figuring out how much to change them.

[Ascinder]

I believe mine were dropped down 2". But it may have only been 1.5, I'll have to check and see.

[Ldub]

I'm about 90% sure that Sean over @ MWIOR used VX diff. brackets as the "donors" when he dropped the front of his Amigo...if that cross-over info. is of any help.

Seems to me, I remember a spirited discussion on the 4x4 wire as to the interchangability between years/models. Might be worth a search...

[taylorRichie]

I'm about 90% sure that Sean over @ MWIOR used VX diff. brackets as the "donors" when he dropped the front of his Amigo...if that cross-over info. is of any help.

Seems to me, I remember a spirited discussion on the 4x4 wire as to the interchangability between years/models. Might be worth a search...

THREAD RESURRECTION....

By the transitive property, could one assume, Diff Drop brackets designed for the Amigo (darlington diff drop brackets) would work on the Vehicross?

Might have a line on a never installed set.

[tomdietrying]

Man, if anyone can get someone to make multiple drop brackets....put me down for one. I'll buy it!
Peace.
Tom
012009

[Ldub]

THREAD RESURRECTION....

By the transitive property, could one assume, Diff Drop brackets designed for the Amigo (darlington diff drop brackets) would work on the Vehicross?

Might have a line on a never installed set.

Never assume ...the best answer I can give you right now is "possibly".

If you search the 4X4wire, in the Isuzu forums, "diff drop brackets", you should be able to find the discussion between Strawmeyers & Mathew(Matt from indy 4x) on this topic.
PM me if you want me to call Sean & ask him for further details, as I'm not sure of the model year of his Amigo.

[tom4bren]

I was going to suggest you check with Indy 4X since they did the lift for Nerve_Gas. He has a 4.5 inch suspension lift so I'm sure he's had some form of diff drop.

I sent him a PM. I'll let you know what he says.

[Nerve_Gas]

Yeah guys I messed up when I had my lift done. I didn't drop the diff and now its hurting me. I have no 4wd at the moment because I had to pull my front drive shaft until I can axle swap. Way to much angle on my CV's. I'm sure Matt at Indy4x could do them just give him a call and talk to him. If he needs a truck to get an idea from just let me know I should be able to run it out there and let him look.