I was going to suggest you check with Indy 4X since they did the lift for Nerve_Gas. He has a 4.5 inch suspension lift so I'm sure he's had some form of diff drop.
I sent him a PM. I'll let you know what he says.
Super VXer
I was going to suggest you check with Indy 4X since they did the lift for Nerve_Gas. He has a 4.5 inch suspension lift so I'm sure he's had some form of diff drop.
I sent him a PM. I'll let you know what he says.
Last edited by tom4bren : 05/29/2008 at 02:42 PM
[SIGPIC][/SIGPIC]
Put a smiley after you say that Bub.
VXer
Yeah guys I messed up when I had my lift done. I didn't drop the diff and now its hurting me. I have no 4wd at the moment because I had to pull my front drive shaft until I can axle swap. Way to much angle on my CV's. I'm sure Matt at Indy4x could do them just give him a call and talk to him. If he needs a truck to get an idea from just let me know I should be able to run it out there and let him look.
Custom Independent4x 4.5" suspension lift, Custom Independent4x 3" body lift, 36x13.50R16 Irok radials, 16x8 American Racing Mojave teflons, Warn locking front hubs, Independent4x extended braided brake lines, Independent4x heavy duty tie rods, Calmini extended bump stops, Calmini extended brake line brackets, Rancho RS9000X shocks,1.5" wheel spacers, And trimmed cladding
Super VXer
I'd be interested in checking out a how to if anyone tackles this job in the near future. I have a set of the Darlington brackets just waiting to be installed but I started looking at what all would need to be taken apart and decided to put it off a few more weekends...
Calmini Cone Air Filter, PowerVault PV2 Muffler, OME Trooper Springs, Rancho RS9000X Shocks, 285/75R16 Nitto Grappler AT's, Pioneer DEH P8000R In-Dash CD, Amps and Drivers Built by Orion, Wires and Fuse Blocks by KnuKonceptz, Vibration Damping by BQuiet, Alarm System featuring Auto Start and Remote Windows, Yakima LoadWarrior w/Full Size Spare, Debadged/Custom Titanium Grill Logo, Tint (5% Rear / 20% Front), Steel Braided Brake Lines, G2 Painted Calipers
Super VXer
Feel free to send them my way and I'll do a full write up of my installationOriginally Posted by kpaske
I'd be interested in checking out a how to if anyone tackles this job in the near future. I have a set of the Darlington brackets just waiting to be installed but I started looking at what all would need to be taken apart and decided to put it off a few more weekends...
Thanks in advance,
Richie
Super VXer
Oh how satisfying it is to know I have in my possession probably the last set of drop brackets Joe Darlington will ever make for the VX... Muuuhahahaha
Super VXer
Maybe, this is just a start, make some replicas from your drop differentials and give them as gifts to your VX family members.
Peace.
Tom
012009
"Through Great Sacrifice..... Great Rewards Will Be Achieved"
Super VXer
Kpaske _ I am not so sure about that. Before I got mine he offered to make me a set with the crossmember drop. His price was just higher than the offer I got from a welder.
Posting Permissions
Reply With Quote
