Tail-light "Mulligan"

[Ldub]

Since there has been a bit of interest expressed in my "outside the box" tail light treatment, I thought I'd post the latest version.
Both before & after were done with the same 3/8" half round body moulding, just different colors.

Before:



After:

[jkstephens83]

Looks good

[JHarris1385]

Looks great. How is this secured to the light?

[Ldub]

Looks great. How is this secured to the light?

It comes with 3M double stick adhesive tape on the back side.
Installation is easy, just time consuming...also, MUCH easier if you remove the T-L housing & work with it in your lap while watching TV & enjoying your libation of choice.

[ZEUS]

I might have to do a "copy and paste" of that mod. So how is the rest of the bodywork coming - got a plan?

[Ldub]

I might have to do a "copy and paste" of that mod. So how is the rest of the bodywork coming - got a plan?

Getting a salvage r. side tail light housing/lens last week, was the inspiration for doing this tail light treatment in black instead of bling...I already have a new pass. side door in my inventory & a friend willing to help "iron out" the r/r quarter...as far as the "hot tub flop" damage goes...I've re-attached the mirror & am not sure what I'm going to do with the wrinkled door...leave it as a trail badge or fix it.
So, as plans go...this is coming together better than most I make.

[rowhard]

LDUB, never cared for tail light covers. (I mean, why cover what the guy behind you who is about to hit you can see) And headlight covers, Do you drive with dark sunglasses on at night because it cool. bone head decision.

But, I like your mod. It has very little effect on what the guy behind you can see. So, hint hint, $$ for you. I want a set, either in chrome (if I go with a chrome look) or black. Or, maybe you can write a how to for everyone with photo's. either way, that mod will be on my beloved Dragon soon.

Well Done Mate

[Kenny]

As always Larry, nice job!

[Ldub]

So, hint hint, $$ for you. I want a set, either in chrome (if I go with a chrome look) or black. Or, maybe you can write a how to for everyone with photo's. either way, that mod will be on my beloved Dragon soon.

Well Done Mate

Sorry Rowhard, It's not something that I could prefab & sell, as there are just too many variables such as placement, varying radius in the corners & so on.

I will give you the most important tidbits though...

Part # T3602C (black) from O'Reilleys...Style Guard brand
730-4240 (black) from NAPA...Prostripe brand
(they appear to be identical)

Check my gallery for more pics

For the perimeter, I put my splice on the bottom, just below the reverse light.

Wherever there is a splice or intersection, make your cut square across the moulding, but at a 15-20 degree angle so it overlaps.

A sharp pruning shears or utility knife works best for cutting...don't try to cut it exactly to length...cut it a little long & test fit until it's right.

For the cross bars, follow the pattern in the lens to keep them straight.

It's not that hard, a 3-4 beer job. Take the tail lights out, go sit in the shade, clean em up real good, then clean em again with rubbing alcohol, cut an angle on your first peice of perimeter moulding, & away ya go. Keep the area in front of where you're working clean (where you've accidentally touched the lens) to promote good adhesion.

You won't be able to follow the exact perimeter of the tail light lens, as some of the radii are too tight...if using black, do a little touch up with a sharpie marker or black enamel where it doesn't quite cover to the outside edge.

Do the perimeter first, then do the cross peices.

Replace tail lights, admire your handy man tail light mod, have "she" come out & look at said handy work, have more beer...

[Raque Thomas]

It's not that hard, a 3-4 beer job.

Wow, only 15 minutes to complete this mod!

[Dino]

Nice work. I admire your tasteful mods.
I like the black better than "bling".

There's a wide variety of body trim at most automotive stores paint supply houses.

[Ldub]

Nice work. I admire your tasteful mods.
I like the black better than "bling".

There's a wide variety of body trim at most automotive stores paint supply houses.

Whattayasayin bra...some of my mods are less than tasteful?
Eh, datz OK, I only do em' to please me, as should everyone. After all, if we all liked the same style/stuph, we would all be driving bowties, blu ovalz or yugos.

R T...if you take the short cut & substitute vodka for beer, you can be done in a matter of seconds.

[rowhard]

hey DUB, with some of kentuckys finest, I can make a all afternooner of this. How much should I buy? 10 feet or so.

[Ldub]

hey DUB, with some of kentuckys finest, I can make a all afternooner of this. How much should I buy? 10 feet or so.

The ones I mentioned earlier come in 18' rolls...which is about 12' too much.(I used about 3' per, with maybe 8-10" waste total)

On the plus side, it gives you LOTS of leeway for "do overs"(mulligans )

Another weird factoid...the chrome is about half the cost of "plain ol' black"...go figure.

And another nuther thing...the chrome "checks" after time on the tighter bends.

[CrnCnn]

we would all be driving bowties, blu ovalz or yugos.

I understand that people mostly would have to push yugos more than drive them.