For the disbelievers:

This is the new injector o-rings:




This is the o-rings in 100% Acetone:




This is the same o-rings after being in the 100% for 1 week with comparison to new ones: Notice the swelling:





This is from left to right 100% gas immersed, new, 100% acetone immersed.





This is one is comparison of new on the left with one that was in a acetone mixture that I currently have in my tank 2oz per 10 gallons.





The elasticity and porosity is the same. Trust me I am not going to take a ridiculous risk with my pride and joy. On the other hand I will not be held responsible for others who try and face faults. At 2oz per 10 gallons or 4oz in our whole tank, just imagine 4 shot glasses in a 20 gallon aquarium - do you really think that potency is really going to do damage? Conversely I cant believe that this mixture also has these results. There is a sweet spot for this as well. I would not recommend doing anything more than 3.5oz per 10 gallons either. To much is possible resulting in negative effects to the gas mileage. Like I said I have a few engineers and professors working with me on this one.