Im down for a set...
Im down for a set...
Since you slotted the holes for bolting through, I would make the slots for horizontal adjustment. (side to side) (not vertical)
One thing I would suggest:
the original plastic tabs had a texture to them, which allowed the glue to "stick" to it. Also, Im not sure, but I THINK the glue dissolved the plastic a little to allow for better bonding. Metal- not so much.
So I would suggest that you add a bunch of drill holes so that when you put the glue in, it gets squeezed through the holes and doesnt come loose. Ever.
My windows are fine..........for now,but I am definitely down for a set to hedge against future problems.
The reasonable man adapts himself to the world; the unreasonable man persists in trying to adapt the world to himself. Therefore all progress depends on me.
Recevied in the mail today, thanks!
I'll put them in this weekend.
Cool....let me know how they work out for you
Tim
www.streetboutiquecustoms.com
Worked like a charm! Tilting problem completely solved! I only installed in the passenger door because my driver side doesn't have any problems. Will install in the driver side once it starts going.