Results 1 to 12 of 12

Thread: Shocks For VX

  1. #1
    Member Since
    Oct 2005
    Location
    2001 Proton Vehicross
    Posts
    676
    Thanked: 0

    Shocks For VX

    Could I get some suggestions on a few questions bout shocks?

    1. How long on avg does shocks last on a VX if it is only normal driving not offroading?

    2. What is a good shock that provides a good ride at reasonable cost for only normal driving no offroading.

    3. Please provides links or places to buy the shocks you recommend.

    Thanks for everyones input I like consulting for fellow VXers before I make any decisions. Thats why a lot of my posts are qustions.

  2. #2
    Member Since
    Jun 2004
    Location
    99 Astral Silver VX #1872 + 99 Ironman WIP
    Posts
    10,613
    Thanked: 1

    Arrow

    I think the majority around here would agree that Rancho 9000's are the most often used aftermarket shock.
    I'm still using my original stockers @ 50,000 mi. & am starting to notice a little "sponginess".
    I have an extra set that I'm planning to have re-built when finances allow.

    Do a forum search on shocks & you'll find LOTS of info on the subject.

  3. #3
    Member Since
    Dec 2004
    Location
    Former owner of Supercharged #0604, now in withdrawal
    Posts
    1,484
    Thanked: 0
    Do the search and you will find all the info, debates, and links you want.

    A quick comparison...

    Rancho 9000s are adjustable, but only for bump or rebound (don't recall which).

    Bilsteins B46-1738/1739's provide a near-stock ride and have a lifetime warranty.

    Both can be found for reasonable prices. I got my Bils here: http://www.shox.com/

  4. #4
    Member Since
    Jun 2002
    Location
    '99
    Posts
    1,158
    Thanked: 0
    I've read a couple times here that the Rancho RS9000X shocks do not adjust for both rebound and compression. I don't know where that came from. When you try these by hand right outta the box, you can feel the same resistance both ways in the different settings.

    Their web site does say these shocks can be mounted in either direction if the application permits. If they only adjusted one way, they would need to tell you that 'cuz it would make a huge difference in the ride mounted one way or the other. Their site doesn't have anything specific about the settings working both ways so I sent a question to their tech support and got the following reply-
    Thank you for your interest in Rancho products. The adjustable RS9000 series shocks adjust the rebound and compression at the same time when you turn the knob through all the settings.

    Rancho team member
    Vladi


    These shocks are the best thing I've ever done for my VX. Knowing what I know now, I woulda replaced the stock shocks within three days after buying my VX new. My first two sets lasted for 50,000 miles each. I'm still lovin' the ride with my third set on 8.

    Lots of folks like the stock shocks and don't like the RS9000X shocks even set on 9. People like me looking for a softer ride really like the change these shocks give you.

    Mark Griffin
    Last edited by deermagnet : 07/14/2007 at 08:05 AM

  5. #5
    Member Since
    Oct 2005
    Location
    2001 Proton Vehicross
    Posts
    676
    Thanked: 0
    Yes i would like a softer ride and i heard lot bout the rancho 9000x just making sure they are as good as people say and it seems it cause im going on 100k i think i need new ones.

  6. #6
    Member Since
    Mar 2006
    Location
    2001, Orange (ex-Proton), #0758
    Posts
    369
    Thanked: 0
    I have KYB Monomax installed, but does not feel comfortable with them. I heard report from the guy who swapped Monomax to RS9000 and he told that he rates original shocks as choise #1, then Monomax, then Rancho.

    There was also reports that Tokico is a good choice and give you very comfortable ride unless you drive like a Formula #1 pilot, because of they not firm enough as stock on corners

    I'm personally think that I will swap mine with OME as soon as Monomax die...
    2001 Isuzu VehiCROSS (build in progress): 4JX1/A340/part time, 2" body lift, front Aisin hubs, rear Aussie Locker, 4.56 gears, OEM rear sway bar disconnect, AirFlow snorkel, cabin air filter
    1980 Jeep Cherokee (assembling): 1.5" body lift, TBI, HEI
    1987 AMC Eagle: stock

  7. #7
    Member Since
    Oct 2005
    Location
    2001 Proton Vehicross
    Posts
    676
    Thanked: 0
    Ok so now i hear there not good hmmmm so confused i just want a nice ride. Wel how bout if it is possible to buy new stock shocks and have them put on?

  8. #8
    Member Since
    Jun 2004
    Location
    99 Astral Silver VX #1872 + 99 Ironman WIP
    Posts
    10,613
    Thanked: 1

    Arrow

    Quote Originally Posted by Lizardmen3477
    Ok so now i hear there not good hmmmm so confused i just want a nice ride. Wel how bout if it is possible to buy new stock shocks and have them put on?
    Last I heard, new Isuzu replacement shocks were tippin' the scales at over four hundred $...EACH ...give Merlin a call @ St.Charles Isuzu (800-727-8966) to check on this.

    There is a guy in NC that will re-build the stockers for about $120-130 ea.(sorry, can't remember exact price) Bruces Suspension (704-637-3675).

    Just another option.
    Last edited by Ldub : 07/14/2007 at 06:57 AM

  9. #9
    Member Since
    Oct 2005
    Location
    2001 Proton Vehicross
    Posts
    676
    Thanked: 0
    Dang!!! Ok nvm that. I am going to look into OME now and see what their bout anymore suggestions will be awesome. Thanks

  10. #10
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    anyone ever tried edelbrock shocks on a vx or another vehicle? ive been happy with all the other edelbrock stuff i got and these shocks look like they might be able to keep up with the stockers if they make them that would fit the vx...



    Edelbrock Xtreme Travel Shocks
    The Edelbrock Xtreme Travel Shocks are the ultimate in off-raod shocks. They have extra travel for improved off road performance with increased oil capacity for cooler operation. The 5/8'' diameter nitro steel piston rod provides the most off-road durability in a shock.


    "Engineers believe if it ain't broke, it doesn't have enough features yet"

  11. #11
    Member Since
    Dec 2002
    Location
    2001 Ebony 0177
    Posts
    2,120
    Thanked: 0
    Go with the original KYBs. Yeah they are expensive, but the whole kit was more or less designed around them. That's why you get such tenacious cornering grip, from a vehicle this tall. Any softer, it will wallow, any stiffer, it will pogo. Spend the sheckles, go OEM! Wayne

  12. #12
    Member Since
    Oct 2005
    Location
    2001 Proton Vehicross
    Posts
    676
    Thanked: 0
    Sorry but im not spending 1600 on some shocks thats crazy i will get some opinions of the pros round here see what they think. I like the OME so far.

Similar Threads

  1. shocks
    By vehiXrs in forum VX Talk...
    Replies: 3
    Last Post: 08/08/2012, 03:44 AM
  2. Shocks?
    By gexxo18 in forum VX Troubleshooting...
    Replies: 6
    Last Post: 01/28/2009, 10:19 PM
  3. VX shocks
    By GOVEHIX in forum VX Talk...
    Replies: 6
    Last Post: 11/26/2004, 08:02 AM
  4. KYB Shocks
    By UNEVEN THOUGHTS in forum VX Talk...
    Replies: 1
    Last Post: 11/26/2004, 07:55 AM
  5. OME Shocks
    By VR4-Quest in forum VX Modifications...
    Replies: 4
    Last Post: 03/16/2004, 03:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails