Custom Bull Bar/Winch Mount

[BBVX]

After some minor altercations with some small boulders I decided to have one of my offroad welder friends help me whip up some body armor. I stole this from Grampa Bob and (hopefully) improved upon it.

First the upper mounting brackets and the top horizontal rail are attached to the bumper tube behind the cladding.


Then the lower mounting brackets and the twin vertical styles are bolted to the tow hook mounts under the VX frame.


Then add the bottom horizontal rail. Tack weld all these together, leaving the cladding in place to adjust and measure for proper placement.


Remove the cladding to weld the pipe joints and the pipes to the mounting brackets.


Then add the 1/4" plate and the winch base with holes drilled through the bottom to access the winch mounting bolts.


Add the two diagonal winch base supports and the two secondary frame pieces to strengthen the main chassis. A skid plate could be added here, but it was getting late.


By using the stock tow hook mounting holes underneath, and bolting the upper brackets to 2" by 4" pieces of steel welded to the tube frame behind the cladding, the whole unit is removable in about 5 minutes.


Brian

[Green Dragon]

Good Job Brian! Consider a couple of tabs for mounting lights.
What winch have you installed?

[Dallas4u]

Mmmmm... yummy!

I like it a LOT! Nice custom fab!

[Tone]

Yup, VERY nice - great work and excellent removability idea.

[BigMeatVX]

Looks Nice, but that tube piece behind the cladding is VERY weak,

looks like it was made of the same thickness as the sheet metal!!!

Doubt it would hold up to any serious winching ...esepcially at an angle....


just my 2 cents




Allan

[SPAZZ]

word!!! I'm with you Allan

[TDAWG]

Hey Brian,
Great good on the Fab. Can't wait to see them up close on our next meet.

[BBVX]

I don't know guys, it looks pretty strong to me!





I'll let you know when it falls off!

Brian

[BBVX]

Bob,

I bought the Warn M6000SDP that slides into a class III hitch. We cut all that off and just kept the mounting plate and the stock fairlead.

Brian

[Green Dragon]

Originally posted by BBVX


I don't know guys, it looks pretty strong to me!





I'll let you know when it falls off!

Brian

The Man In The Arena
"It is not the critic who counts, not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man in the arena, whose face is marred by dust and sweat and blood, who strives valiantly...who knows the great enthusiasms, the great devotions, who spends himself in a worthy cause, who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who have never known neither victory nor defeat."

Teddy Roosevelt

[TDAWG]

Hey BBVX,
So how much did those sweet looking bars set you back? If you don't mind me asking?

[BBVX]

It took us about 12 hours and believe it or not, the guy wanted to charge me $50!
I'll give him at least $300.

Brian

[TimG]

Originally posted by BBVX
It took us about 12 hours and believe it or not, the guy wanted to charge me $50!
I'll give him at least $300.

Brian

I have that same problem with a mechanic/welder friend that helps me out sometimes.
He wants me to buy him a case of beer and thats it.
I always give him a reasonable amount of money as well as the beer.
I know how much I hate working on my family's computers all the time,
and I don't want him to dread me asking him for help with mechanical/welding stuff
like I do every time any family member even mentions a computer.