Magnetic Bra

[tom4bren]

I took the magnetic bra off of the Proton yesterday and found some kind of tacky residue all over.

I rubbed and rubbed with clay bar & got most of it off. I still need to try a few other products to get the rest.

What worries me most though is that all along the edge where the trim secures the bra, there is a pattern of the trim. I can't tell if it's pressed into the paint or if it's just more of the residue that hasn't come off yet.

I'll post again after I finish getting her cleaned up but Y'all may want to check yours.

BTW, I'm not blaming the bra yet. It may have just been the wax I used before I installed it or maybe I should have been more diligent about cleaning and drying under it.

[fuzzy]

So... did it hose anything up? I still have mine in a box because of this post.

[tom4bren]

It cleaned up pretty good but there were still a couple of areas that I still need to polish some more.

Since I'm the only one that seems to have had this issue, I'll take the blame that I didn't prep the hood well enough (or take off the bra after each rain & dry it real good - I procrastinate & forget).

I put mine back on already & will keep an eye on things for a while. If I notice anything else, I'll post.

Fuzzy, I'd say go for it, they really look great.

[workmeistr]

I have a magnetic bra coming. I read this thread and the earlier comprehensive development thread (and, yes, Bob Lefevre is still offering forum members the $39 price, $49.95 to your door.)

I think all of the installed pictures that I have seen are on VX's without the rubber headlight seals. The leading edge of the hood looks like it sits pretty flush onto my headlight seals. Does anyone have a magnetic bra installed on a VX with the headlight perimeter rubbers in place? Any issues with the retaining trim pushing down/separating the headlight seals?

My email to Bob about the forum price:

Hi, Bob,
I'm a member of the vehicross.info group. If this price is still good, that would be great, if not, just email me your PayPal account name and I'll tack on another $10. I need an Isuzu VehiCROSS bra in black. If you could leave off the "Magnetic Bra" logo, that would be great also. I'll let everyone know where it came from but I'm not keen to logos on my VX products. In fact, if you want to throw in some business cards I'll keep them in the glove box for when people ask about the bra. There are many car nuts here in the Monterey area, but I have never seen one of these bras locally. We have alot of sand on the road here from the beaches and lots of cars with "pocked" leading-edge hoods. Anyway, your reputation precedes you on the vehicross.info site and I'm just now enjoying my 3rd week of ownership of my "new" VehiCROSS, so this is actually one of the first mods that I will do. Thanks for your time and I look forward to installing your product, Bren.

Bob's email back:

Hello Bren:
A couple more notes: You can pinch the edge trim and then install it to make it fit tight at the corners. Also, I think there is a logo on the bra but it's just a decal and you can remove it easily by lifting the edge with a pocket knife. Thanks again. Bob Lefevre

Bob seems like a stand-up guy and I would like to think those on this site that assisted in the development of the bra and have offered their bra care experience and lessons learned.

[Jolly Roger VX'er]

or take off the bra after each rain & dry it real good - I procrastinate & forget).

Any kind of bra is for traveling only, the longer you leave it on when not traveling the more issues will crop up. (dust & dirt accumulating underneath will act as sandpaper on the paint, wetness/dampness will begin to cloud the paint with a film, sunshine will gradually fade all of your paint "except" that covered by the bra...therefore you get like a tan-line effect.)

Hope this helps! Or in short...if you use a front-end bra...don't procrastinate!

[tom4bren]

"Any kind of bra is for traveling only, the longer you leave it on when not traveling the more issues will crop up. (dust & dirt accumulating underneath will act as sandpaper on the paint, wetness/dampness will begin to cloud the paint with a film, sunshine will gradually fade all of your paint "except" that covered by the bra...therefore you get like a tan-line effect.)"

All true. I would prolly have left it off but Wifey really likes the look so I leave it on.

[workmeistr]

I like the look, too, Tom. Maybe it's something about Bren's...

I do have a trip to Nebraska in December and then on to Virginia in January, so it will definately pay for itself on the cross-country trip.

In the mean time, I'll probably do the critical first-time-no-bubble install and ride it 'til it's formed, then remove it for daily driving.