Switching Front Seats

[rowhard]

Not to hi jack, since the question is about the seats and rails. Did I see somewhere here about lowering the seats? Is that possible and if so, how involved?

[mrtew]

Yeah I'd like to know about lowering the seats too!!!

After 8 years I no longer noticed anymore how ridiculously high the seats are mounted in the VX even though passengers always commented on it but after driving my new Camaro for the summer with its height adjustable seats I now realize what we are missing. The VX feels great if I slouch down in my seat about 2 inches so I don't need any replies from you short guys under 6 foot telling me that yours feels fine :-]

I remember one guy from years ago that lowered his by basically smashing down the floorpan under the seat rails with a hammer and I guess that would probably be the only way to do it but I thought I'd ask in case I missed something else. Is there any other way to lower the seats or does anyone else remember that posting?

[JoFotoz]

Here ya go rowhard & mrtew...

http://vehicross.info/forums/showthr...ght=seat+lower


jo

[VX crazy]

Thats why I like the vehicross......cuz I am short waisted and otherwise would need a phone book or something....

[RodL]

Revisiting. Thought about doing this soon and wonder is there have been any problems for those who did/or didn't do it in 2009. If I had lifting help I would have done it today but couldn't find anyone.

Rod

[Marlin]

I swapped my seats a few years ago, as for the uneven wear, I think it is because the driver has the steering wheel to pull himself into the truck, so less sliding across the seat. Just a thought. Swapping them was easy, and while they are out, take a sledge hammer and bang that rear lip flush with the seat so you can actually reach under the seat from the rear. I keep ice scraper, first aid kit etc under there Also allows you to easily disconnect the TOD computer, and connect it back if you are going to drive on snowy roads and want TOD back on.

[Shawn138]

What does disconnecting the TOD do? and can you just connect and unconnect it? The reason I ask is last month I flatted and had to use the spare. Holy! I thought I was going to explode my drive train!

[Marlin]

It turns off the tod computer so in theory makes it real 2wd, although the prop shafts still spins but not really much loading. If you have manual hubs tod display just flashes up and down all the time. Not anymore, mine is just dark.

[Mile High VX]

What does disconnecting the TOD do? and can you just connect and unconnect it? The reason I ask is last month I flatted and had to use the spare. Holy! I thought I was going to explode my drive train!

Make sure you always have regular tires on the back and the spare on the front. Extra work if your flat is on the back to move a front tire to the back and then put the spare on the front, but it does make a difference.

[Shawn138]

I wish I knew about the tire switching thing when I flatted. It was my rear. I would has done extra work just to not put the truck through that. Also I don't have manual hubs.

[RodL]

Is not having the compact spare on the back due to the limited slip differential?

[tom4bren]

Here ya go rowhard & mrtew...

http://vehicross.info/forums/showthr...ght=seat+lower

jo

I've attached the pdf of Nazrat's write-up as well ... just to make life simpler for Y'all ... Yerrr welcome!

Is not having the compact spare on the back due to the limited slip differential?

That & the TOD. Both systems don't like the donut on the rear.