General stuff...

[nfpgasmask]

BRAKES: I've been running the R1 Concepts brakes and drilled/slotted Rotors now for a while. My personal evaluation of this setup is

So, I just ordered a set of front and rear OEM pads from Merlin. I am going to put these on, keeping the R1 Concepts rotors and see if there is a difference. Basically, since the switch from stock to R1, my stopping capability has been a little scary, to say the least.

Kenny: I think I remember talking to you about this, and you said it has something to do with the width of the pad, correct? Well, I mentioned this to my guy over at Big-O Tires and he said he has heard that the R1 brakes and other similar "racing" brakes need to "heat up" to really work well. IMHO, that is a load of doo-doo. Even if it is the case, I ain't racing with my VX (I've already been pulled over 4 times since I moved out west, including last week in Seattle where the highway speed limit is a miserable 60mph and the cops drive unmarked, white SUVs and unmarked Dodge Chargers, which is cheating if you ask me). Anyway, any thoughts on this?

HEADLIGHTS: Recently, I scored a NIB passenger side head lamp on eBay for just over $100. Now I want the driver's side lamp assembly. Merlin quoted me $324.69! OUCH! Does anyone have a NIB, left-side, headlamp they want to sell me for less??? I want to make my head lamps clear again.

OTHER STUFF: I also ordered from Merlin several little trim pieces that were unavoidably broken by me during the Hella install, and a replacement tailgate cover screw, also which I over-turned and broke.

I'm also still thinking of a small lift of an inch or so. I drool over those BFG M/Ts every time I am in the Big-O shop...

So thats my blabber for the day. Just thought I would share.

Bart

PS - BTW, my ABS light is still on and off...on more than off rather.

[cyronman]

(I've already been pulled over 4 times since I moved out west, including last week in Seattle where the highway speed limit is a miserable 60mph and the cops drive unmarked, white SUVs and unmarked Dodge Chargers, which is cheating if you ask me).

Don't forget the Taxi Cabs!!
cheating, indeed.

HEADLIGHTS:
I just printed out the polishing How-To yesterday, as my headlights are in need of it. I'm gonna give it a shot soon (this weekend?). Have you considered/tried that already, or simply looking for brand new? I almost bought a brand new pair but just couldn't bring myself to shell out for it.

OTHER STUFF:
You mean a cladding (torx) screw?
Out of curiosity, how much from Merlin, and single or do they come in bulk?
I stripped 1 last week and would like some on hand for the future.

Thanx and Good luck with the pads, dude.
Cy

[ZEUS]

Thanks for the head up on the brakes. I had been considering that purchase.

[MSHardeman]

Bart,

I have done IndianaVX's headlight polish, and it works like a charm. You may want to save the new light that you have and give the polish a go. It's easy to do, and doesn't take that long. I was super meticulous and I think it only took me 45 minutes per light.

I just put in an order for some SP Performance drilled and slotted rotors, so I'll have to let you know how they work. I know Kenny is running them right now so maybe he'll pipe in on how they are working out.

Good luck with everything.

[nfpgasmask]

Yup, I've seen it. I may go that route. Or maybe I just buy the left hand headlight when I feel like burning $350 on something I don't really need!

How much were the SP rotors?

Bart

Bart,

I have done IndianaVX's headlight polish, and it works like a charm. You may want to save the new light that you have and give the polish a go. It's easy to do, and doesn't take that long. I was super meticulous and I think it only took me 45 minutes per light.

I just put in an order for some SP Performance drilled and slotted rotors, so I'll have to let you know how they work. I know Kenny is running them right now so maybe he'll pipe in on how they are working out.

Good luck with everything.

[nfpgasmask]

Yeah, hopefully Biju will chime in. He has had a completely different experience with R1, but I *think* he only has R1 rotors with stock pads, and he also has a brake line upgrade...

That said, hopefully Kenny will chime in too.

Bart

Thanks for the head up on the brakes. I had been considering that purchase.

[nfpgasmask]

Don't forget the Taxi Cabs!!
cheating, indeed.

Yeah, I was speeding to get ahead of 3 semis that were blocking my exit in heavy traffic in the rain, and long story short, pulling me over almost caused a wreck. The cop ended up letting me off but man, I was pissed.

HEADLIGHTS:
I just printed out the polishing How-To yesterday, as my headlights are in need of it. I'm gonna give it a shot soon (this weekend?). Have you considered/tried that already, or simply looking for brand new? I almost bought a brand new pair but just couldn't bring myself to shell out for it.

Yeah, polishing is an option. The only reason I thought about new ones, was because I scored a new right-hand one for $100 on eBay, and figured that if I can get another for the left side, I would have nice new ones plus a back up pair....I may go the polishing route after all.

OTHER STUFF:
You mean a cladding (torx) screw?
Out of curiosity, how much from Merlin, and single or do they come in bulk?
I stripped 1 last week and would like some on hand for the future.

Negative. I snapped one of those round plastic covers that hide bolts in the head liner, and also somehow I lost a little plastic fastener that runs along the lower sill on the inside.

Thanx and Good luck with the pads, dude.
Cy

Thanks!

[cyronman]

I'm also still thinking of a small lift of an inch or so.

Don't know if you know about his setup, but I just asked Ascinder to explain his spacer lift a little.

http://vehicross.info/forums/showthr...8301#post98301

[nfpgasmask]

I have seen his setup first hand in fact. I think he recently did a diff bracket drop or something to correct his CV problem. His lift is HIGH. I don't really want to go up that much. I would be happy with an inch or so, just so I could get a little more clearance and little more meat on my Chambers. I am just worried about the CV issue. My VX is it, thus I can't have any downtime...

Bart

Don't know if you know about his setup, but I just asked Ascinder to explain his spacer lift a little.

http://vehicross.info/forums/showthr...8301#post98301

[etlsport]

ascinders lift is adjustable.. i looked into it for the same reason you are.. wanted more clearance but not CV issues... never around to doing it.. its a plate that welds to the spring mounting area and has a large bolt through the center.. then a cup of sorts that screws down onto the bolt.. which lets you adjust your amount of lift from 0-2.5" or 2.5-5" i think

[Ascinder]

its a plate that welds to the spring mounting area and has a large bolt through the center.. then a cup of sorts that screws down onto the bolt.. which lets you adjust your amount of lift from 0-2.5" or 2.5-5" i think

For the most part that is correct, except the welding the plate. I just set mine in there and also added an additional polyurethane "donut" to cut down on any metal on metal. The VX has one of these "donuts" on it from the factory, but it is made out of rubber. It goes in between the top of the spring and the upper spring perch. If you do some really crazy offroad stuff where you really articulate your rear end to where the springs could possibly fall out, then you may want to anchor those plates in there somehow. When I did my lift though, I found that between the spring tension and the shock travel I really doubt they could fall out with the additional 4.5" in there. The shocks just wont travel enough to allow it to come loose, although for ~1" lift they obviously would. Another point of concern is that the last time I checked, they(speedway) was only offering one of the two sizes of spring jacks. The Easiest way to add an inch though(by far) is just to throw in a set of 1" poly spacers and call it a day. Although it is more spendy. You could lift it in under an hour this way-super easy.

[johnnyapollo]

I have OEM pads on the R1 brakes - had them for about a year. The last time Joe Black came up he commented on how stiff the brakes were - I said it was probably the SS lines, but he said he also has those. I'm not sure what pads Joes is running, but it could be the combo that's making them so stiff.

-- John

[nfpgasmask]

The Easiest way to add an inch though(by far) is just to throw in a set of 1" poly spacers and call it a day. Although it is more spendy. You could lift it in under an hour this way-super easy.

This is probably the route I will go.

Bart

[cyronman]

I have seen his setup first hand in fact. His lift is HIGH. I don't really want to go up that much. I would be happy with an inch or so,
Bart

The Easiest way to add an inch though(by far) is just to throw in a set of 1" poly spacers and call it a day. Although it is more spendy. You could lift it in under an hour this way-super easy.

I didn't know he went up that high.

The 1'' spacer method is what I meant.

[Triathlete]

I'm also still thinking of a small lift of an inch or so. I drool over those BFG M/Ts every time I am in the Big-O shop...

Bart

You should hold off on those MT's until the BFG MT T/A KM2's are available...they are SWEEEEEET! They have a tread pattern very similar to the Krawlers.