clicking sound

[WiSDoM]

I got my Vx back today, they could onjly determine the noise was coming from the diff. they told me to take it to the dealership and if it was their install that f***ed it up then they would reimburse me for the work. when they gave me the old half shaft back from the original install it was in pieces. is that normal for the install to have to strip all the guts from the inner cv on the halfshaft? any ideas what could have happened?

[Y33TREKker]

....when they gave me the old half shaft back from the original install it was in pieces. is that normal for the install to have to strip all the guts from the inner cv on the halfshaft? any ideas what could have happened?

What kind of replacement parts were listed on the work order/receipt? It's possible they replaced items such as the boot, seals, ball guide, ball bearings, guide retainer, etc when installing a new axle assembly. That would seem normal. That still wouldn't explain why you have a noise eminating from an area where there wasn't one before though.

If they're offering to foot the bill for a dealership to check things out and possibly make any repairs necessary, it'd sure at least be worth another opinion, although personally, I might be inclined to get that offer in writing first.

[WiSDoM]

yeah they are only offering to pay the dealership if it is due to their install.

[WiSDoM]

dealership says it is a worn cv joint. so now what are my options have the cv rebuilt?try to find another junk yard half shaft? i have tried ordering new halfshafts from many places but no luck with them in stock. any ideas?

[WiSDoM]

guys here is the deal. i looked at the half shaft that the garagerreturned to me the day i picked it up and it has been taken all a part. It looks to me like the garage didn't know what they were doing and may have stripped the replacement half shaft for part to rebuild the existing half shaft instead of replace it. I called the dealership and they told me a few weeks ago that a the mechanic called and asked about how to remove the driverside half shaft.
It took them two days to do the work and in those two days they managed to break my abs sensor, abs ring, and one of my HD tie-rod ends from indy. I looked it the maual but it just tell about removing the passenger side axle.

so what i need to know is what is involved in the removal so i can question the mechanic with a good idea on process he should have taken?

any help would be great, i know some of you guys have replaced your own.

[Ldub]

I'm sorry to hear this has taken a rather nasty turn...yet another reason I'll never let another boy with a wrench near my Suzy...

What I'd like to know, is how in the HELL do you fubar one of Indy4X's H-D tie rod ends??? You didn't see large bunches of banannas hanging from the break room ceiling did you?

[WiSDoM]

I know i was like what the ****??? then i called indy and they wouldn't tell me the part# so i could cross reference it at napa. but napa was able to match it up okay.