DIY metal parts via CNC online

[reptiles]

Greetings,

I've not used this service for VX parts but it was a life saver for some custom parts I needed on other cars.

It is www.eMachineshop.com --you download their free CAD program, make your design, upload it for a quote, and then they machine it and send it to you.

I've had things made in nylon, stainless steel, and aluminum. Simple things in cheap metals are actually not too pricey.

Of course, the trade off, is that you have to design it, but the software only takes a couple days to become comfortable with (although I'm no expert.)

Regards,

Mark

[Knigh7s]

I've used this service several times myself. made some parts for my RC car and some stuff for my eclipse... I've made some stuff for the VX, but never sent it in for protos... great service for those that don't want to find and deal with an actuall shop...

[rowhard]

So, what is there web site? Might be a fix for the VX emblem that is no longer available.

[Knigh7s]

eMachineshop.com

So, what is there web site? Might be a fix for the VX emblem that is no longer available.

Already working on that

[Joe_Black]

I've been familiar with the site for years and know several folk who have had good results dealing with them. Knigh7s, how was the set-up charge compared to final value for the parts you had done? I'm initially looking to have a custom stainless tabernacle done for my sailboat and it appears it would more economical to use them than to have it done locally. It's getting more and more difficult to find a decent local machine shop that does much more than basic services.

[Knigh7s]

Joe,
Im on my laptop right now, I'll have to double check when i can access my computer.

with my pockets, the items where somewhat expensive for one off pieces. but the prices did get lower as the quantity went up. if sold you would easily make a decent return. They have this "rapid prototyping" option for cheaper testing. Only thing I didnt like was some limitations to the software.

[don moore]

got it on my favs ..got some ideas also..hmmmm

[VCrossfan]

So, what is there web site? Might be a fix for the VX emblem that is no longer available.

Hey Rowhard, I've contacted AUTORACERX and he has given me the ok to use his design (Thx RacerX) and since I have access to a Laser I am tweeking to get the size just right. I've made some test runs and I'm almost satisfied. Mati used is .036" (20 gauge)Stainless, One set in the pic is the pvc coating (film) removed, the others are still covered...my range of mati thickness is 24 gauge to 16 gauge. I'll start a new post when all's good...

[don moore]

how much for 2 VXs.....??

[4X4 UFO]

VCrossfan, I would be interested in a couple of those VX emblems myself......

[Toad80t]

Hey Rowhard, I've contacted AUTORACERX and he has given me the ok to use his design (Thx RacerX) and since I have access to a Laser I am tweeking to get the size just right. I've made some test runs and I'm almost satisfied. Mati used is .036" (20 gauge)Stainless, One set in the pic is the pvc coating (film) removed, the others are still covered...my range of mati thickness is 24 gauge to 16 gauge. I'll start a new post when all's good...

I would buy one also! Be sure to post when you get them done.:bgwg:

[VCrossfan]

OK OK, Lets not steal reptiles thread, (Sorry reptile my fault) . I will start a new Thread once I get everything ironed out...

[Pepino]

ya i would like two VX emblems!