Page 1 of 2 1 2 LastLast
Results 1 to 15 of 22

Thread: Door Lock Rod Clip - help finding replacement

  1. #1
    Member Since
    Feb 2008
    Location
    2000, Black, 0546
    Posts
    2
    Thanked: 0

    Door Lock Rod Clip - help finding replacement

    Hello -

    I'm unable to open my driver side door from the outside using the door handle. Basically, a small plastic part that connects the internal handle mechanism to a rod (which opens the door) has broken.

    Here's a sketch of a similar part I found online (for Toyota/Lexus):



    Any ideas on where I can get this part? Isuzu dealership wasn't much help, saying the part was either part of the handle kit, or a more expensive kit that includes the rod along with a bunch of other things.

    Thanks!

  2. #2
    Member Since
    Jul 2003
    Location
    '01 Ebony #0939
    Posts
    2,142
    Thanked: 5
    St. Charles Isuzu
    1-800-727-8066
    Ask for Merlin

    Isuzu part # for drivers door is 8-97037509
    Isuzu part # for passenger door is 8-97037508

    They don't cost alot, and from what I've seen it's a somewhat common occurence, so ordering a couple of each when getting a replacement might not be a bad idea...as long as you have somewhere in mind to keep them in the meantime that you'll be able to remember when it happens again.

  3. #3
    Member Since
    Mar 2007
    Location
    2001 black vehicross 1190
    Posts
    339
    Thanked: 0
    For starters, go to:

    http://www.myisuzuparts.com/thumbnail_view.php

    Page through the illustrations on this site to find the part.

    Then call Merlin in the parts department (talk just to him personally) at St. Charles Isuzu:

    1-800-727-8066


    Navi

  4. #4
    Member Since
    Jun 2005
    Location
    01 Dragon Green VX 1286
    Posts
    423
    Thanked: 0
    I got a help pack from the local checker auto parts/kragen/shucks store.. and the black one worked so far.. 4.99

  5. #5
    Member Since
    Feb 2007
    Location
    2001 Proton VX #0690
    Posts
    685
    Thanked: 0
    Quote Originally Posted by davidrepas View Post
    Any ideas on where I can get this part? Isuzu dealership wasn't much help, saying the part was either part of the handle kit, or a more expensive kit that includes the rod along with a bunch of other things.
    Find a new dealership. That's probably easier said than done, of course...

    This part is a common weakness, and if the dealer had any clue what-so-ever, they would have known immediately what you wanted, and probably had a handful in stock. I've replaced mine once already, and I suspect there's a pretty large percentage of owners who have.

    Use the info that Y33TREKker left you above, and call Merlin. Your dealer is useless.

  6. #6
    Member Since
    Dec 2005
    Location
    2001, Dragon Green, 1342
    Posts
    2,393
    Thanked: 0
    Also, you might want to take a look at the how to article I wrote on the subject. Pretty simple process. You might want to go ahead as I suggested and order the other side, chance are it will fail pretty soon too.

    http://vehicross.info/modules.php?na...warticle&id=22
    Last edited by rowhard : 02/19/2008 at 05:53 PM Reason: addition
    Greetings, Earthling. We come in peace... Never mind "Paris to Dakar", the VehiCROSS looks ready for the Martian desert.

  7. #7
    Member Since
    Feb 2008
    Location
    2000, Black, 0546
    Posts
    2
    Thanked: 0
    Wow! You guys are awesome - thanks for the info and advice.


    Thanks,
    David

  8. #8
    Member Since
    Oct 2005
    Location
    1999, black, vehicross,1165
    Posts
    4
    Thanked: 0
    I had same problem, a zip tie can be worked into there to hold it in place until replacement part comes in.

  9. #9
    Member Since
    Feb 2007
    Location
    2001 Proton VX #0690
    Posts
    685
    Thanked: 0
    Quote Originally Posted by eli2extremevx View Post
    I had same problem, a zip tie can be worked into there to hold it in place until replacement part comes in.
    ...that's funny... when mine failed, I found a broken zip tie attached to it. Apparently, the previous owner thought the same.

  10. #10
    Member Since
    Dec 2004
    Location
    '99 VX Astral Silver #0949
    Posts
    633
    Thanked: 0
    I just used a GM part 16627328 $0.63 ea.
    Isuzu dealer is 85mi away.
    Looked a little different, but works great.
    looks like it will work on both sides
    Sometimes I Wonder......
    Why Is That Frizbee Getting Bigger?
    Then It Hits Me



  11. #11
    Member Since
    May 2006
    Location
    SOLD!
    Posts
    7,257
    Thanked: 2
    Just saw this thread. I will try to get some from Merlin. I need one for the drivers side.

    Right now I am still using the zip tie method. Seems to be holding up too!

    Bart

  12. #12
    Member Since
    Dec 2004
    Location
    '99 VX Astral Silver #0949
    Posts
    633
    Thanked: 0
    Quote Originally Posted by Bulldoggie View Post
    I just used a GM part 16627328 $0.63 ea.
    Isuzu dealer is 85mi away.
    Looked a little different, but works great.
    looks like it will work on both sides
    nevermind this part has fallen out, already

  13. #13
    Member Since
    May 2006
    Location
    SOLD!
    Posts
    7,257
    Thanked: 2
    So I am on with Phil about the clips. The part #s are actually:

    Driver's Side: 897037509-0
    Passenger's Side: 897037508-0

    I guess they need that zero on the end. .88 cents each with our discount. I am ordering a couple spares.

    All that said, I am still not 100% sure this is the right part, so I will report back when the parts arrive.

    Bart

  14. #14
    Member Since
    May 2006
    Location
    SOLD!
    Posts
    7,257
    Thanked: 2
    Got the parts yesterday. The above part numbers are what you want. I order an extra one for each side. Strange thing is, the driver's side ones are made from brown plastic and the passenger side ones are white plastic. But hey, they are correct!

    Bart

  15. #15
    Member Since
    Jun 2002
    Location
    2001, FoxFire Red, VehiCross, 1267
    Posts
    55
    Thanked: 0
    I ran into this problem today and as always, I knew to come here for help. I found a Dorman brand Help! package at Advance Auto, part number 75450. The black clip did the job for me. Probably a similar or same package as Solitude used back in 2008. Probably an hour in labor total.
    Jason White
    2001 FoxFire Red VehiCross

Similar Threads

  1. Stuck Door Lock!
    By RAZ in forum VX Troubleshooting...
    Replies: 19
    Last Post: 05/30/2015, 09:22 AM
  2. HELP - Door Lock Issue
    By mikieg in forum VX Troubleshooting...
    Replies: 18
    Last Post: 03/26/2011, 08:19 PM
  3. door lock motor
    By protonvxmatt in forum VX Troubleshooting...
    Replies: 3
    Last Post: 04/01/2009, 08:16 PM
  4. Finding Isuzu Replacement Parts
    By Mark B in forum VX Talk...
    Replies: 1
    Last Post: 08/25/2006, 02:02 PM
  5. Lug Lock replacement?
    By WormGod in forum VX Troubleshooting...
    Replies: 9
    Last Post: 12/01/2003, 11:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails