To the diff droppers - please respond

[JHarris1385]

My brackets are almost in the line to be cut to be modified for the 2 inch drop. This would have been completed already but the guy working on them had a heart attack late last week.

The problem....I got a brief email from Joe Darlington from Darlington off road and he stated without explaining that anything more than 1.5 inches of drop would give steering interferences.


First what is a steering interference?

Second to all of the diff. droppers out there. Have you noticed anything negative since dropping?

[ZEUS]

Just guessing here, but maybe there is a very subtle difference between the VX and the Trooper which the kit was intended for. In any case, I have nothing in the way of the steering linkages.

[JHarris1385]

Good answer. So you do not notice anything different right? Joe is VERY slow to respond and has yet to explain what he meant.

Your also driving without the crossmember right? Any problems that could cuase or did I read that wrong?

[Ascinder]

My steering has been fine. And thats with much thicker tierods.

[JHarris1385]

+2 thanks alot. The guy is out of the hospital...going to call to give them the go ahead.

I need to learn how to make the same tie rods as you have. Did you get my reply email yesterday?

[Ascinder]

Just responded.

[ZEUS]

Your also driving without the crossmember right? Any problems that could cuase or did I read that wrong?

Yeah, you read it right. I have been too lazy to come up with a way to reinstall the crossmember. Big pot holes make me nervous - I wouldn't recommend being the idiot I am... if you are going to drive without the crossmember for a bit, just slow it down and be extra careful.

[JHarris1385]

Here is Joe's reply

"I believe the idler arm hits the bracket and depending on the truck there could be some cv intereference with the lower a-arm."


So i guess this is not true to the VX?

[tom4bren]

"I wouldn't recommend being the idiot I am..."

You KNOW I'll be quoting you on that

[ZEUS]

I WOULDN'T EXPECT ANYTHING LESS. Of course, I also know you can relate!

[Ascinder]

I'll see if I can shoot some pics tomorrow of the steering at full locks and in between to show you. Maybe I'll even feel adventurous and try for some video. I am pretty much certain nothing touches anything it's not supposed to.

[WiSDoM]

I have mine dropped two inches and have not noticed any issues.

[tomdietrying]

Tom,
How much are your differentials dropped, 2 or 2.5 inches?
Peace.
Tom

[tom4bren]

J,

I heard the same thing from Joe (NTE 1.5 inch drop). The only thing that didn't work with the 2 inch drop is the breather tube. You'll have to splice in another section or replace with a longer tube (could possibly just re-route it to get some extra length but I haven't tried). I've not noticed any steering interference issues with a 2 inch drop.

Zeus,

I've got a set of crossmember drops sitting in my office collecting dust. PM me if interested. BTW - of course I can relate

Tom,

2 inch drop is the optimum to compensate for a 3 inch lift (IMHO). I've thought of trying a 2.5 but don't think it's necessary.

[ZEUS]

FYI, I didn't need to add any additional tubing for the breather - open the hood and feed the tube down a little and it should work, I don't think I had to reroute it, but I might have done that as well.

Just my opinion, but I think 2.5 is too much, I know it doesn't sound like 1/2" is that much difference but I think 2" is the max you would want to drop for various reasons.

Now, think Beach Boys:

Tom tom tom...
tom tom 4bren.

Tom tom tom...
tom tom 4bren.

TOM 4 BRE-ENNNN...
Gotta wide sta-aaance...
TOM 4 BRE-ENNNN...
Your VX is a rockin and rollin...
And is a really really wide un...
Tom tom tom...
tom tom 4bren.

Thanks man, but my redneckulous crossmember is holding all that leaking diff juice just fine!