How to read and erase ABS, TOD, and Airbag codes

[deermagnet]

edit

[ojmagg]

I've the dreded ABS light...So I'm showing codes 42 and 43... which is FL Holding and FR Decompression valve short or disconnect...what should I check/replace?

[ojmagg]

???Control Module???

[DarkWing]

You know, no where else on the web do I think you find all of this information and experience. Un-real.

Kudos guys.

D.W.

[tomdietrying]

DeeeMagnet,
Thanks for taking your time to put this together for us. This weekend I'm going to play around with this.
Peace.
Tom
012009

[Ldub]

Thanks Deer Mag...if there is a better example of why people should not think twice about a yearly donation to keep this site flush with operating capital, I can't imagine what it would be.

The potential to $ave hundred$, if not thou$and$ of dollar$ IMO, far outweigh$ a paltry donation of twenty buck$ a year.

Again, Thank You, for all the info. you provide, & for taking the time to gather & post it!

I don't know where you find all this stuff, but assume you would have to kill me if you told me...so I don't wanna know...

[ojmagg]

Yeah, I tried unplugging and plugging back in the ABS module...I'll try the cleaner...prob end up taking out the fuse, as ABS is over-rated...

This site is priceless...I know I've saved thousands using it. THANKS!!!

[nfpgasmask]

OK guys, just today, my VX started flashing the 'CHECK' light under the TOD. Following the above instructions, it looks like you need to jumper pin 4 or 5 with pin 8 on the diag connector. I did this with a paperclip, and it does not change the flashing. Am I doing something wrong? It just keeps constantly flashing, it does not flash....flash flash for 12 or anything.

Any suggestions? I am going to try some copper wire when I get home, maybe the paperclip isn't conducting enough. The paperclip works in my Trooper's diag terminal so I can't see why it wouldn't work here.

Anyway, the VX is running and shifting fine, I'm hoping its just a sensor or something.

Thanks - Bart

[Axelivan]

Hi Bart, did you get your TOD light problem solve? I got mine flashing. I'm thinking from exactly after a hard brake on a red light

[nfpgasmask]

Hi Bart, did you get your TOD light problem solve? I got mine flashing. I'm thinking from exactly after a hard brake on a red light

Nope, I have not had a chance to work on it again. VX has been....resting. I drive it once or twice a month and that's about it. I would love to find a solution. I might have to bite the bullet and buy OEM sensors at some point. I hope the transfer case is ok.

Bart

[frankd14321]

WTH.. the above tutorial is gone.. just says "edit"?

[kehecross]

edit

What happened to the check code instructions? My ABS light just came on and I would like to check the codes. I have read it before a long time ago and know you have to jump pins but I don't know which ones. When I go to deermagnets instruction it says edit 02/06/13.

[stonewis]

I bookmarked this a long time ago thinking I may need it one day. Well, one day is here and the instructions are gone? Anyone know where I can find it?

[The Claw]

My TOD has thrown a checklight, any chance the procedure to check the codes is going to comeback soon?

[tom4bren]

Got'cher back.

Here's the file.