biggest tire size?

[drowd]

Thanks a ton! This might be just the tire I was looking for, this forum is really unmatched with how helpful and friendly it is. Thanks all!

[Ldub]

Thanks a ton! This might be just the tire I was looking for, this forum is really unmatched with how helpful and friendly it is. Thanks all!

LOL...

You should see us in action during election time every four years...

Or when a ref makes a bad call...like 7 yrs ago...

It can get stupid ugly...

[Cobrajet]

Thanks a ton! This might be just the tire I was looking for, this forum is really unmatched with how helpful and friendly it is. Thanks all!

LOL...

You should see us in action during election time every four years...

Or when a ref makes a bad call...like 7 yrs ago...

It can get stupid ugly...

And don't forget the color of our cladding (it IS gray!!)

[TEXAGGIE-VX-01]

I'm wanting to know if the Nitto Terra Grapplers 275/6518 will fit

[VX KAT]

I'm wanting to know if the Nitto Terra Grapplers 275/6518 will fit

Did you review and read THIS thread from the beginning? That size is dicsussed, as well as 285/16-18, so you can compare those specs, plus I give a reference to a tire size calculator to help you figure it out, in post #7 and #23, Dub gave a tire size diagram, and I attached a picture showing exactly what may need to be trimmed....

Remember, the search function is your friend....especially with a VERY common question like this.

[TEXAGGIE-VX-01]

They ended up fitting with minor trimming to the front. These are the 275/65R18's

[VXCanada]

Yokohama 280/60R18 Geolander AT/S on 18x8.0 wheels require a bit of trim on the front. Very minor.



T.

[vx1999]

Try this tire size calculator to compare what you have to alternatives:

http://www.discounttire.com/dtcs/infoTireMath.do

[Mile High VX]

Try this tire size calculator to compare what you have to alternatives:

http://www.discounttire.com/dtcs/infoTireMath.do

Remember that if you're using aftermarket rims with a different offset than the +38 OEM this is good for speedometer variance but won't tell the whole story on what cladding trim might be needed...