Results 1 to 12 of 12

Thread: 2 Din stereo questions - anyone have images? anyone point me to images?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Apr 2008
    Location
    2000, Kaiser, 0134
    Posts
    834
    Thanked: 0

    2 Din stereo questions - anyone have images? anyone point me to images?

    I had originally planned on doing a motorized LCD, but with the stock mount location being so counter sunk I'm afraid that the deck will be tilted too far forward, and I don't want my deck hanging halfway out to correct that.

    So...

    I think I'm going to go for a double din install. Does anyone have images of 2 Din setups In the stock stereo location? Can it be done keeping the air vents intact? I have searched the forums... Most I could find is that the stock deck in the JDM model was 2 din... that's basically it. Searched the galleries for images, and couldn't find anything either.

    Any help?

    Thanks!

  2. #2
    Member Since
    Apr 2008
    Location
    2000, Kaiser, 0134
    Posts
    834
    Thanked: 0
    Clearly I should have looked at my dash before posting that...

    Looks like I may have to ditch/relocate the vents...

    I saw images in the gallery of someone who did that to put in a screen...

    Anyone know if they've suffered from lack of Cooling/Heating?

    I have freezing winters, and Hotter than H. Summers.

    Anyone know the part number for the Dash Trim? And approximate cost? I may buy an extra one, make modifications to it, and see how it goes... Then If I'm unhappy... no harm.

  3. #3
    Member Since
    Mar 2008
    Location
    ex-owner '99 ebony...looking for a dragon green.
    Posts
    29
    Thanked: 0
    It takes major vent modification for a double din to fit. I like the flip out monitors. Check out zadam123's...looks very nice. Also check his gallery for pics of his linex'd cladding, you asked about that in a prior post. When the Utahn August rolls around I think you'll be more interested in ample A/C vent flow than watching your Family Guy DVDs
    http://www.vehicross.info/forums/sho...highlight=avic

  4. #4
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    i ran into the same problems you did... check the gallery of Nuk for a nice double din install... you can get the dash from a rodeo too, i think 95-97 rodeos (and honda passports) have the same dash as a VX... i have bought a few from scrap yards to try different ideas (and am looking for another right now actually..) for prices ranging 5-15 bucks.. if you want ill look around for one and ship it out to you (prob be about 10 to ship).. only real differnce in the dash is that theirs is black ours is silver.. but it will need to be painted anyway after the modding

    the way i resolved that issue was to install a cd/dvd/mp3 player in the lower din slot and installed a flip out LCD screen upside down in the upper slot.. so instead of flipping up and hitting the top of the dash.. it flips downwards in front of the vents... it hasnt caused any problems for me because in the winter time the heat is directed at your feet or the windshield with the auto climate control, and in the summer the crotch A/C is the best vent anyway.. and its ok to have your LCD monitor cold.. you just dont want it hot.. and honestly i rarely use the monitor anyway.. i have used it maybe 10 times in 2008... just to find a specific song on an MP3 CD and a couple of times while waiting for someone ill pop in a DVD and watch it to pass the time






    try also talking to vxdakinechic. Sometime last year she looked into having a monitor installed upside down and there was some sort of problem the install place had with it. She needed a bunch of photos of my install to show them, not sure if she ever got it finished or what


    "Engineers believe if it ain't broke, it doesn't have enough features yet"

  5. #5
    Member Since
    Jul 2006
    Location
    2000 IronMan #11
    Posts
    2,753
    Thanked: 0
    While on this subject of deventing the middle air vents. I have always not liked the vents anyways. I would like to replace them with ones that would allow them to fully cut off. I personally do not think loosing your middle vents will mater much at all. How easy would it be to redirect the airflow or block it so that more pressure comes out of the remaining? I have been thinking about the in dash large LCD as well but would like to make sure that the middle vents cane be properly blocked.

  6. #6
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    wouldnt really be too hard.. if you were going to do it i would recommend tracing them farther down into the dash and blocking them off as far down as you can. if you block them off right behind your dash, whatever you used to block them is still going to get hot or cold from the climate control. keep in mind if you have the same amount of air coming from your fan to a lower number of vents you are going to get more noise from your vents because the air speed will be higher

Similar Threads

  1. Gasmasks? Wow look at these images!
    By johnnyapollo in forum VX Talk...
    Replies: 5
    Last Post: 08/06/2008, 08:07 AM
  2. Ceder Point in Sandusky, OH
    By V12BMW in forum Meets...
    Replies: 5
    Last Post: 05/24/2005, 11:58 PM
  3. Torsion bar adjustment reference point question
    By dkmiller68 in forum VX Modifications...
    Replies: 6
    Last Post: 05/04/2005, 08:19 AM
  4. 5 point harness
    By Apostle in forum VX Modifications...
    Replies: 2
    Last Post: 12/17/2003, 06:59 PM
  5. PV Muffler... Images?
    By paultvx in forum VX Talk...
    Replies: 4
    Last Post: 10/24/2002, 11:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails