Page 1 of 2 1 2 LastLast
Results 1 to 15 of 16

Thread: How to change small circular lights in the front bumper bumper

  1. #1
    Member Since
    May 2008
    Location
    1999 black 1597
    Posts
    2
    Thanked: 0

    Smile How to change small circular lights in the front bumper bumper

    Hello, would anyone have any suggestions on how to change the small circular lights in the front bumper. The space is way small for a hand to fit underneath or above. Please if anyone has any suggestions, let me know. : ) Thanks!

  2. #2
    Member Since
    Jan 2003
    Location
    2001, IronMan White, #440
    Posts
    1,750
    Thanked: 0

    Thumbs up

    No problem.......open your hood and and look down on your head lights. There should be one opening for your hand to go down. Put your hand down the hole and grab the back end of your fog lights. Twist and push out the front.

    I changed Taylor Richie's for hiom in Moab. It took about 30 seconds apiece.

    BTW - Since you are changing out one of the stock ones. They are only 3 watts and look terrible. Go to Home DePot and buy the Malibu 18 watt bulbs. They only cost $4 for four, and they look much better than the stock ones.

    Peace.
    Tom
    012009
    "Through Great Sacrifice..... Great Rewards Will Be Achieved"

  3. #3
    Member Since
    Apr 2008
    Location
    2000, Kaiser, 0134
    Posts
    834
    Thanked: 0
    Yes They are awesome!!

    Thanks Again Tom!!

    Very nice meeting you, and a Great Ride... I did an even Hairier one the next day.

    If you've got any pix from Dome Plateau I'd love to see them.

    Richie

  4. #4
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    also if you have a good grip you can get your fingertips around the lights and they will twist like 1/4 turn and pull straight out of the front bumper


    "Engineers believe if it ain't broke, it doesn't have enough features yet"

  5. #5
    Member Since
    Jul 2008
    Location
    1999, Astral Silver, VX, 1508
    Posts
    523
    Thanked: 0

    Question How do you turn them on?

    Unless both mine are burned out (I have not checked), but do they turn on with low beams or high? Do they have a separate switch cuz the owner's manual does not mention them or I am blind and yes a 2 month VX newbie owner...
    Larry S.
    99 Astral Silver VX (176k)
    91 Porsche 928 S4 (73k)

  6. #6
    Member Since
    Jun 2002
    Location
    Former owner of '01 Ebony #0739
    Posts
    1,579
    Thanked: 5
    Quote Originally Posted by lasturbo View Post
    Unless both mine are burned out (I have not checked), but do they turn on with low beams or high? Do they have a separate switch cuz the owner's manual does not mention them or I am blind and yes a 2 month VX newbie owner...

    The little round lights are on as soon as you turn your light switch to the first position (even if you don't turn on your headlights). Low beam or high beam does not matter at all. They are burned out if they do not come on. There is no separate switch.
    The only thing we have to fear is fear itself... and zombies.


    My VehiCROSS

  7. #7
    Member Since
    Dec 2005
    Location
    2001, Dragon Green, 1342
    Posts
    2,393
    Thanked: 0
    And if you want to take it one step father, Moncha wrote up a how to for the Hella Micro DE's as a replacement. I took that one step father and converted them to HID's which I have a how to write-up also.
    Greetings, Earthling. We come in peace... Never mind "Paris to Dakar", the VehiCROSS looks ready for the Martian desert.

  8. #8
    Member Since
    Jul 2008
    Location
    1999, Astral Silver, VX, 1508
    Posts
    523
    Thanked: 0

    Smile Thanks guys!

    I will pull those bad boys out and check em' and maybe even convert em'!!!

  9. #9
    Member Since
    May 2002
    Location
    2000, Proton Yellow, VX, 0584
    Posts
    2,584
    Thanked: 10
    Here's a link to that How to Section If you're interested, my write up is at the bottom.
    Last edited by Moncha : 01/20/2010 at 05:44 PM
    Scott / moncha.com

  10. #10
    Member Since
    Apr 2004
    Location
    2000, Ebony, VX, 0370
    Posts
    2,503
    Thanked: 12
    If you're a smart guy you can figure out how to replace the round lights with any kind of fog lights. Since I'm not that smart I used Moncha's write up to get the wiriing right and to help me wire the factory switch (that I got from Merlin). It's a great write up, easy to follow and can be adapted for any lights.

    Have fun and take pictures of the results.
    "The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
    -Douglas Adams, Mostly Harmless

  11. #11
    Member Since
    Dec 2004
    Location
    Former owner of Supercharged #0604, now in withdrawal
    Posts
    1,484
    Thanked: 0
    I noticed one of mine was out the other day. I had a pair of these lights I got from someone about 3 years ago, so I pulled one of the bulbs out to replace mine. Well surprise - it's BLUE! So I replaced both of them, and now I have blueish little round lights.

    Call it an unintentional mod...

  12. #12
    Member Since
    Dec 2009
    Location
    2001 Kaiser 0634
    Posts
    22
    Thanked: 0
    Well..I don't want to jack this thread but I wasn't finding what I needed w/the search function. My drivers side light is out, and I figured why not replace both? I haven't found anything on putting in LED replacements for the Fogs, has anyone done this?

  13. #13
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    You should be able to pick up LED replacement bulbs that are direct replacement for the standard bulbs. Mine still work though so I've never tried.
    [SIGPIC][/SIGPIC]

    Put a smiley after you say that Bub.

  14. #14
    Member Since
    May 2002
    Location
    2000, Proton Yellow, VX, 0584
    Posts
    2,584
    Thanked: 10
    I've done complete LED replacement for the turn signals front and rear, the side markers front and rear and the "horn" lights above the headlamps. As Tom said, just a simple wedge replacement for the OEM socket would be very easy but not very bright, unless that is what you are after. Here's the link to the write ups I did in the Review Section. There are some newer, brighter choices for LEDs out there and they keep getting brighter, but I still haven't found any that can out shine my 100 watt DE's or the HIDs that some have put in.

  15. #15
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    See Handito. I TOLD you Scott was the brightest bulb in the lamp. You didn't believe me.

    (Yes Handeeman, you ARE Handito - sidekick extraordinare)

Similar Threads

  1. Front Bumper Guard
    By sk8home in forum VX Modifications...
    Replies: 5
    Last Post: 02/13/2013, 06:19 AM
  2. Replies: 9
    Last Post: 02/02/2013, 08:42 PM
  3. Front bumper bar rusted out?
    By sleveritt in forum VX Talk...
    Replies: 21
    Last Post: 04/02/2010, 02:37 PM
  4. Front Bumper Work...boo hoo
    By VX4EJR in forum VX Troubleshooting...
    Replies: 4
    Last Post: 12/12/2007, 01:57 PM
  5. Need a pic of front without bumper cover
    By VX4EJR in forum VX Troubleshooting...
    Replies: 6
    Last Post: 10/30/2007, 05:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails