June 28th International Mini Meet

[nfpgasmask]

The little "VehiCROSS" doors are going to be very difficult to find. They came with the factory crossbars, and were very prone to falling off. I actually secured mine with some cable ties to make sure I don't loose them.

Good luck,

Bart

[workmeistr]

I have the plastic "Vehicross" Doors. I need the plastic cap below it that conceals the metal riser clamp to the roof rails. I have weight limit stickers showing. I tried to circle it in the above post's picture. I'm in Tahoe through tomorrow so I will try to post a picture then.

The P.O. had the bars installed, and the caps should have been given to him or reinstalled (there might have been a different one's for VX's without the crossbars, if there were such VX's).

Kenny's picture shows some kind of cap that caps around the riser clamps, onto the roof rail. That's the ticket for me, me thinks.

[nfpgasmask]

I have the plastic "Vehicross" Doors. I need the plastic cap below it that conceals the metal riser clamp to the roof rails. I have weight limit stickers showing. I tried to circle it in the above post's picture. I'm in Tahoe through tomorrow so I will try to post a picture then.

The P.O. had the bars installed, and the caps should have been given to him or reinstalled (there might have been a different one's for VX's without the crossbars, if there were such VX's).

Kenny's picture shows some kind of cap that caps around the riser clamps, onto the roof rail. That's the ticket for me, me thinks.

Yeah, like Etl said, those are the stock covers that have been modified to fit over the installed roof rack risers. Those little pieces are going to be just as hard, if not harder to find than the roof rack components. A set of four sold for over $400 on eBay months back.

Take a look at my page here and you will see what we did:

http://www.nofuture.com/myvx/mods/roofrack.htm

And hell, since you are in Tahoe, you should swing over to Reno and hang for a bit with us Reno VXers.

Bart