Ok fellow VXers...

I need your help...

http://obcserver.net/vega/

I need to come up with 20 different patterns for our LED brake light flasher.

The application works by first choosing how many "frames" you want the pattern to have (on off cycles). Choose 2 (select the 1, and put in 2) then you can do a simple on off (blinking) light. (change brightness on frame 2 to 0).


Max Brightness is 200 (this is 100% on, standard LED brightness) Duration, 40 is equal to .5 seconds.

Play around with it and help me come up with different blinking patterns.

To get an idea of what is happening punch in say 20 frames, and hit random, and then make the duration all to 5.

You should have a fast blinking random brake light (probably the safest thing you could have on the back of your vehicle)

Once you have a pattern tuned to how you like it, click Output Array, and post the array in a reply message here.

Take a look at my Attached image for an example pattern. If you duplicate this pattern you'll see that the brake light strobes from off to on.


If you come up with a cool pattern it just might make it into the light

Either way let me know what you think of the project.

It's an LED controller, it'll have 20 different patterns, and you can toggle between patterns using a Keychain FOB (like an alarm FOB).

Installation is two wires, one robs your brake light signal, the other is ground. Very very simple. Will work on all LED brake lights, or LED lights for that matter.

Richie

Sooner this project has wrapped the sooner the TOD controller will be finished for release.