So any of those Weld Wheels would work on the 4 wheel Parts website as long as it is 18x8.5 & 6x5.5 bolt pattern? The Weld website is weak as it does not show any specs. on the wheels and even some of the wheels that 4 wheel parts website shows. The only spec the VX manual shows is a 38mm offset and the stock wheel is a 18x7JJ. I like the Cheyenne and the Velocity Weld Wheels but I cannot find enough specs on them for offset, etc.(the Weld site does not show these wheels in a 18x8.5). Maybe I am blind or it is on a different link. If not, I can call 4WP or Weld next week for some details. What would be a correct offset for an aftermarket 18x8.5 wheel on a stock VX set-up? I assume the tire size would be the same of 245/6018 or the 255 like JHarris mentioned. The tire would get a little "fatter" because the rim is wider by 1.5 inches. Anyone running anything like this or in the past with no rubbing issues?