Results 1 to 9 of 9

Thread: Grill Guard/Brush Guard, Bumper/Cladding Protection info?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Dec 2005
    Location
    Former Owner of 'ZEUS' aka 1031
    Posts
    3,185
    Thanked: 1
    OH! I need to mention this... I told Rocky Road that they need to take at least an inch off the total length of the sliders so that owners with bigger tires wouldn't have to cut them down. I don't think they listened to me - TaylorRichie and I, both, had to cut ours down so the tires wouldn't rub. If you had to do a lot of cladding trimming (at the rear of the front wheel wells) to fit your tires be sure to contact RR before ordering the sliders. If they refuse to take off an inch or two you may want to order from someone else. Sidenote: I have the prototype set so it may not be worth mentioning, but I am not impressed with the powder coating job they did on them. Their powder coat shop was new at the time my sliders were made, however, so maybe things are better now. It seemed too thin and I have a bit of rust developing at some of the welds.
    Sent from my "two hands on a keyboard"

  2. #2
    Member Since
    Apr 2008
    Location
    2000 Foxfire Red Mica, 0555 (RIP) & 0717
    Posts
    6,229
    Thanked: 3
    Zeus - Do you have the regular rock sliders or the super sliders? I originally wanted step bars to help with entry/exit/roof access, but if you can get rock protection while you're at it, why not right? My question is: are the tube/steps as easily usable as the Luverne step bars? The RR site mentions that their bars are 2" further in than conventional step bars. That's great for the trail, but I'm not so sure my size 13 feet could fit.

    Thoughts?

  3. #3
    Member Since
    Oct 2004
    Location
    99 Astral VX 1032
    Posts
    202
    Thanked: 0
    Triathlete pointed me to Stric9 Sliders. I got them and had them installed this week. Same general design as the RR super sliders. I think they work the same as a step bar. I hate step bars and don't use them, but they rub my ankle the same when I get into the vehicross now and my Borrego with side steps. Really nice for access to the roof! If you make it to Uwharrie this weekend (nudge) you can see them for yourself.

    I don't have pics yet, I will be posting them next week after Uwharrie.
    Last edited by VX1032 : 10/29/2008 at 12:24 PM
    Ryan Christiansen

    Trooper Skid Plates, OME 912's, Stric9 Sliders, Load Warrior with extension, Apline sub in rear door, Apline front speakers, Alpine head unit, Definity Dakota MT 285/75 R16, Aussie Lockers Front and Rear, 4.77 gears and Warn Manual Hubs.http://picasaweb.google.com/RyanVehiX

  4. #4
    Member Since
    Apr 2008
    Location
    2000 Foxfire Red Mica, 0555 (RIP) & 0717
    Posts
    6,229
    Thanked: 3
    Quote Originally Posted by NJ99VX View Post
    Triathlete pointed me to Stric9 Sliders. I got them and had them installed this week. Same general design as the RR super sliders. I think they work the same as a step bar. I hate step bars and don't use them, but they rub my ankle the same when I get into the vehicross now and my Borrego with side steps. Really nice for access to the roof! If you make it to Uwharrie this weekend (nudge) you can see them for yourself.

    I don't have pics yet, I will be posting them next week after Uwharrie.
    Got a website? Tried www.stric9engineering.com but getting a DNS error...

  5. #5
    Member Since
    Oct 2004
    Location
    99 Astral VX 1032
    Posts
    202
    Thanked: 0
    Yeah, thats an issue. They don't have a website anymore. I know there are pics of the sliders on vehicles in the gallery. Search the galleries for stric9. I know Biju has the sliders, and I think the other VX was TusconVX?? I e-mailed him back and forth, but he isn't "fast" with replies. His phone is the best way to reach him.

    Just did a quick search and Biju and Ten36VX have pics in the Vehicross.info galleries.

Similar Threads

  1. Looking for bull bar/brush guard?
    By JWJohns in forum VX Modifications...
    Replies: 3
    Last Post: 10/26/2013, 02:47 PM
  2. Rodeo Brush Guard
    By RabidPony in forum VX Modifications...
    Replies: 7
    Last Post: 03/16/2010, 04:18 PM
  3. Full Brush Guard.....
    By Lizardmen3477 in forum VX Modifications...
    Replies: 1
    Last Post: 08/27/2007, 12:19 PM
  4. Wraparound Brush Guard
    By CrnCnn in forum VX Modifications...
    Replies: 2
    Last Post: 12/10/2006, 10:02 PM
  5. Bull Bar / Brush Guard
    By VR4-Quest in forum VX Talk...
    Replies: 1
    Last Post: 08/11/2003, 02:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails