Post of all Rims and Tires out there!

[89Vette]

Here are the Viscera 777 wheels with 285/50-20 Falken tires mounted on them.



FWIW, these wheels wheren't totally bolt-on. I had to convert the front hub bolts from the allen-cap screw to hex, then grind off nearly half of their head profile for the wheels to hit the backing plate. (Longer studs and spacers would have been another option -- or machine shop to remove about 3/16" from the inside bore depth.)

I also had to modify a bit of the wheel well. A bit of the front well edge was trimmed of and I had to "persuade" one screw on the backside [to intend further via use of a hammer].

These say 31.3" on Falken's website. Kinda hard to see how 33"er's can fit without serious lift. FWIW, I cranked the front up an inch but put it back where it was. I was leaned toward the budget lift (spacers in the rear), but think I like it as-is.

I do really like the big wheel on small truck look. My neighbor thinks it looks like a giant RC car.