Abs Code 35

[johnny010]

So I replaced the abs module that had given me code 43 (means replace the unit).

I grabbed one out of a 1999 Trooper that had 4 wheel disc brakes. Anyway, after install/bleed brakes etc...I tested it key on/off 5 times all good. Did five starts (key on/off) all good. Then test drove it, all good. Stopped for 20 minutes, Then test drove again (key on/off again), and still all good.

The abs light is BACK ON. Got home, checked and I am getting code 35 which is a Valve Relay (shorted or disconnected coil wiring B-9).

Anyone know what to tell me to fix it?

Thanks,

JM

[johnny010]

Bump

[Ldub]

Was there water in the ravine?

[nfpgasmask]

What I am confused about is the code you are getting. My ABS light has been on for a long time, and I get no CEL or codes in my scanguage. How are you reading this code?

Bart

[Ldub]

What I am confused about is the code you are getting. My ABS light has been on for a long time, and I get no CEL or codes in my scanguage. How are you reading this code?

Bart

http://www.vehicross.info/forums/sho...light=ABS+code

[nfpgasmask]

http://www.vehicross.info/forums/sho...light=ABS+code

Whoa, don't know how I missed that thread! Thanks, Dub.

Bart