Anyone Ever See A Rhino-Lined VX?

**Ikkesh** · 02/14/2009, 11:25 AM

I am curious how a VX would look completly Rhino-Lined?

anyone ever seen one or have pics of one?

a VX with an Exo-Skeleton.. Hmmmm

**pbkid** · 02/14/2009, 11:40 AM

im desperately racing to try to get the first exo-skeletoned.....but i just dont make enough money to build it...plus i would need to be locked to make it worthwhile...

but the rhino-lined thing....pretty sure Spazz got his rhino-lined after he rolled it....

**nfpgasmask** · 02/14/2009, 12:49 PM

It has been done. Personally, I do not think it looks good. But that is just me.

Bart

**MustangO4** · 02/14/2009, 01:00 PM

I did my bottom half, hood insert, roof and mirrors with "Herculiner" a roll on truck bed liner. I like it. The rest is flat rustolium with the last coat not thinned and sprayed to "splatter" for a light texture. Then the wheels coated in Duplicolor Spray on TB liner.

**etlsport** · 02/14/2009, 02:32 PM

yea spazz did it... the pics are in jonnie's gallery i think it would look better with a smoother finish... spazz used a diy kit in the interest of saving money

**pbkid** · 02/14/2009, 02:49 PM

mustang03....what is your review of the herculiner stuff??? how difficult was it? how much did it set you back? how tough is it (will it stand up to a little scraping)??? considering doing the same thing to mine on the bottom half this summer....to go along with the front rock bumper, sliders, and rear bumper....give it the offroad look

**Triathlete** · 02/14/2009, 04:16 PM

For paint purposes I think Line-X is a better choice. It comes in different courseness's. You can get a near smooth version and it comes in a ton of colors. It is not for the light-of-wallet though!

**MustangO4** · 02/14/2009, 06:18 PM

Herculiner is good, surface prep is everything. Scuff it up good and you'll have no problem. It is about $90 at Pep Boys, Kragen etc. It is easy, but messy! Don't get it on anything you don't want Herculined, including you! It starts off kinda shiny, almost sparkley, but that goes away in a wash or two. All in all a great deal. Mine is 3 years old and has scraped in some places where I hit it HARD, but I only did 2 coats. I would recomend 3-4, especially where it will get the most wear. It also takes paint fine. Last time I re-painted the truck, I just sprayed the whole thing and it looks as good as new.

**ZEUS** · 02/14/2009, 06:29 PM

Spazz used Line-X for his VX and was able to rent the equipment to spray it himself. It actually looks better in person but he didn't care too much about consistent patterning so it could have looked even better.

http://www.vehicross.info/forums/sho...t=spazz+line-x

**rickshaw** · 02/14/2009, 08:55 PM

I remember seeing Patrick Cooper doing it with line-x.

**pbkid** · 02/14/2009, 09:32 PM

^^^ that thing is SICK!!!!

are those 33's or 35's????

**Ascinder** · 02/15/2009, 02:01 PM

are those 33's or 35's????

Hah!! 34"s

http://www.vehicross.info/forums/showthread.php?t=14301

**Moosewilks** · 02/15/2009, 06:27 PM

Mine was done modestly. I was looking for a front "bra" for mine but couldn't find one. A friend of mine, who worked for Line-X, offered to make one for me out of LineX. He also covered the center hood insert to help out with the continuing chipped paint from the factory as I'm sure many of you have had. I think it turned out great. It's been there for 9-years.

http://www.facebook.com/album.php?ai...910069&l=5674f

Here are some pics.

**tomdietrying** · 02/15/2009, 07:09 PM

Yep, I did the same thing. I use Line-X to do a front bra. I call it a bro just for your information.lol I also Line-Xed the front cladding. I came out really sharp.
Peace.
Tom

Thread: Anyone Ever See A Rhino-Lined VX?

Thread Tools

Display

Anyone Ever See A Rhino-Lined VX?

Similar Threads

Rhino Lined getting it back together!

bed lined cargo area

Line X, or Rhino Lined Cladding... How much did you spend?

Sold my Rhino lined VX

rhino lining

Posting Permissions