Results 1 to 14 of 14

Thread: HVAC Blower Resistor Resisting

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Dec 2005
    Location
    Former Owner of 'ZEUS' aka 1031
    Posts
    3,185
    Thanked: 1
    The compressor fires up like normal but the blower itself... oh, I have a '99, so I am not sure how much we differ in our HVAC controls behind the dash. Anyway, the controls do still have power based only on my observation of the compressor activating.

    I was surprised how clean the resistor block was when I first pulled it; and looking thru the mounting hole everything seemed pretty clean but I guess there may be an obstruction somewhere. Next thing I plan to check will be the fuse block mentioned by carlymac and if that doesn't work I will try all the other things he mentioned...

    Eric, how long has yours been on the fritz?
    Sent from my "two hands on a keyboard"

  2. #2
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    I've not seen our resistor but I'm guessing it's ceramic. If that's the case, soldering the leads may not have fixed it (the resistor element is down deep inside the ceramic). Since you know it fried (& yours is not the first) I'd replace that before doing anything else. Chances are pretty good that replacement of that part will get you another 100K miles.
    [SIGPIC][/SIGPIC]

    Put a smiley after you say that Bub.

  3. #3
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    been acting up since middle of summer.. sounds like we have completely different issues though.. i dont get any power to my hvac controls on 2/3 of my startups.. used to be if i would remove the heater relay and replace it, problem solved for the trip and everything would run as normal.. eventually it started cutting out during driving too where id lose power to the controls (and the whole system would turn off).. i replaced the relay completely and that helped for like 2 weeks then back to how it was again.. right now i just have the relay removed completely and bypassed with a wire.. it works fine except the hvac system doesnt turn off with the car so i just have to make sure to switch it off manually

  4. #4
    Member Since
    Jun 2002
    Location
    '99
    Posts
    1,158
    Thanked: 0
    Back in the day, those resistors were burnin' up so fast, Tone was repairing and/or making his own. Check and see if he has any laying around.

    I had the burning smell and the motor quit six years ago almost to the day. It was so long ago I was still under warranty. My dealer had the resistor and a motor shipped overnight via that Isuzu Parts Emergency Replacement Program or whatever it's called. With the weather around 0°, it was an emergency. It was no fun without the blower motor.

    I actually don't know if the motor burned up also. I didn't need to know 'cuz I wasn't paying for it. It's been fine ever since. Just try a new resistor first, by whatever means ya can get one.

    Mark

  5. #5
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    "Any ideas on other things to check?"

    'lectric fan???? All that throttle response finally did you in.

  6. #6
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    Quote Originally Posted by ZEUS View Post
    I really wish we had an available smilie with the middle finger salute... just for you.
    You could borrow one from Pirate 4x!
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  7. #7
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    I try. Some things just never get old

Similar Threads

  1. HVAC blower motor problem...HELP
    By carlymac in forum VX Modifications...
    Replies: 10
    Last Post: 08/02/2013, 05:18 PM
  2. A/C Blower Fan Resistor
    By Sean Rogers in forum VX Talk...
    Replies: 4
    Last Post: 12/08/2008, 06:16 AM
  3. The Resistor Nemesis
    By -wadestock- in forum VX Troubleshooting...
    Replies: 6
    Last Post: 12/08/2005, 12:49 PM
  4. OT: Do we have anyone who is in HVAC???
    By Simon Templar in forum VX Talk...
    Replies: 2
    Last Post: 09/24/2004, 04:59 PM
  5. HVAC - Flap in the Breeze
    By skullcap in forum VX Troubleshooting...
    Replies: 2
    Last Post: 04/30/2003, 09:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails