Results 1 to 15 of 20

Thread: front door speaker replacements

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0

    front door speaker replacements

    hey, just did some work on my VX today, changed the front door speakers to infinity reference component's...

    i also took the speaker grill out of the front doors...and added red LED's...just thought maybe a little excitement for driving at night

    im also gonna post some info on wiring info for anyone else looking to do their front speakers...

    front left door-
    woofer + blue
    - yellow

    tweeter+ black/yellow
    - green/white

    front right door-
    woofer + blue
    - grey

    tweeter+ green/yellow
    - dark green/ yellow

    ill post some pics of the LED work later....

    heres some keywords for people searching-
    front, speakers, tweeters, wires, wiring

    hope it helps
    "Do Not Seek Praise. Seek Criticism."

    "If You Can't Solve A Problem, It's Because You're Playing By The Rules."

    "The Perosn Who Doesn't Make Mistakes Is Unlikely To Make Anything."

    -Paul Arden

  2. #2
    Member Since
    Jun 2004
    Location
    99 Astral Silver VX #1872 + 99 Ironman WIP
    Posts
    10,613
    Thanked: 1
    Ah young Master Jack, so young & already much smarter than yer old uncle...

    I was nutz enough to pull all new wires (BIG wires) through those skinny door boots, & it's NO fun...

    I used Infinity reference panels for my rear speakers & love them long time...
    (sorry, just watched full metal jacket...)

    GOOD INFO.!

  3. #3
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    i put all new wires in too.. mostly cause i have an amp pushing the speakers in the doors.. easiest way to run wires through those boots is to pull it free from both sides... get it as vertical as possible and push a thin walled metal tube through.. then run your wires through that, slide the tube off and voila!

    i am lookin forward to seeing the LEDs.. i still want to put alarm LEDs on my door panels one day.. stupid cold weather

    anyone looking to up grade, check out amazon's deal of the day today.. infinity reference 6.5" speakers.. with a small amount of modding they will fit in the front door

    http://www.amazon.com/gp/goldbox/ref=cs_top_nav_gb27

    offer is only good 02/17/09 though

  4. #4
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    etl, as a matter of fact, most vehicles have good enough wiring to handle 4-channel power...

    the only time its really necessary to run new wires is if the wires are a small gauge, which the VX has standard gauge wire (and mine was in pretty good shape)...im pretty confident that they will perform really well with a 4-channel...

    ill also have to post some pics of my rear speakers im getting set up
    im trying to get really creative with them...

    i've decided that i dont like the location of the stock rear speakers so im moving them to behind the headrests....i actually bought some badarse 4x6 infinity 2 ways and some nice boxes to build them into...
    ill get some pics of those up later

  5. #5
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    hmm good to know.. knowing that, i still probably wouldve changed the wires, just because its too much of a pain to try to tie into the wires and re-route them to the amp.. i run 3 pairs of RCA cables from the head unit to behind the drivers seat to the amp.. rather than try to run stock wires to the seat i said just put new ones in

    now you have me on pins and needles waiting to see what you are doing with the rears.. i was in a buddys jeep cherokee not too long ago and noticed the stock rear speakers are mounted in the ceiling.. that got me thinking... but not enough to even begin to attempt that sort of project lol

  6. #6
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    well, mine wont be mounted to the ceiling, but they will be mounted to the big pillar that creates our blind spot...all the way up to the top...

  7. #7
    Member Since
    Aug 2008
    Location
    2001, PROTON YELLOW, VehiCROSS, 1451
    Posts
    1,955
    Thanked: 0
    When replacing OEM speakers, there is only one place to shop: That's right, CRUTCHFIELD!!!

    Crutchfield.com has all the right stuff for replacing OEM speakers, especially their "OEM Speaker Wire Adapters" (which are free with purchase). The OEM Speaker Wire Adapters plug-in between the OEM speaker wire harness and the new replacement speaker. There is absolutely no wire cutting or wire splicing when Crutchfield's OEM Speaker Wire Adapters are used. Once you've used them; you'll refuse to use anything else.

    Crutchfield.com website is state-of-the-art and the only place to buy replacement OEM speakers, period. I've purchased many products from Crutchfield for over 30 years, and their quality of products, service, and garanteed satisifaction is unparalled. Check out Crutchfield.com BEFORE you make any purchase regarding electronics. The free w/purchase OEM Speaker Wire Adapters are "priceless".

  8. #8
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    no offense but are you paid to advertise for them??? that sounded like something you would hear on the radio or see on tv....

    crutchfield is a great place to buy electronics..they have great prices and they have great products...

    but some people need other people to do the work for them, and some people need to talk to a real person in a store because they dont know what they are looking for...

    thats why i have a job...


    anyhow, i tried to load the pics as stated earlier..but the site wouldnt let me...i dont know if they are too big or what the issue was..but im gonna try to host them through photobucket

  9. #9
    Member Since
    Jul 2003
    Location
    '01 Ebony #0939
    Posts
    2,142
    Thanked: 5
    Anyone know where I might find some speaker wire adapters for when I'm installing aftermarket speakers and don't want to splice into the factory harnesses? I swear I've heard of a company that offers those things, but for the life of me I can't remember it's name.












Similar Threads

  1. Front and Rear Speaker install
    By LittleBeast in forum VX Modifications...
    Replies: 28
    Last Post: 06/01/2024, 04:48 PM
  2. Front speaker question.
    By Dumke in forum VX Talk...
    Replies: 6
    Last Post: 07/30/2009, 05:41 AM
  3. Tow Hook Replacements
    By VX1032 in forum VX Modifications...
    Replies: 5
    Last Post: 09/12/2008, 02:14 PM
  4. bulb replacements
    By Vehi-Cross-Az in forum VX Modifications...
    Replies: 14
    Last Post: 12/24/2007, 09:41 PM
  5. Front Speaker Question
    By Joe Isuzu in forum VX Modifications...
    Replies: 6
    Last Post: 03/11/2007, 08:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails